Lanode - Datasheets - A listing of all product pages within Lanode.com

Datasheets - A listing of all product pages within Lanode.com
Routers Tigris Family - Carrier class remote access for service providers and enterprise networks. Available as a 3 or 7 slot chassis the Tigris family provides an integrated access platform that delivers dial-in and dedicated access, as well as high performance routing. The Tigris is a complete remote access concentrator that can establish a point of presence on the internet without a separate routing device. Amazon Family - Regional aggregator, ISDN access server, Internet access. The Amazon and Amazon Rapid are designed to integrate data from branch or home users into the corporate LAN. Supporting all standard wide area services such as Frame Relay, ISDN, X.25, PPP and SMDS. The Amazon family can be configured to use the most cost effective network service. Colorado Family - Remote access, Multiprotocol routing, Legacy integration. Colorado and Colorado Rapid are designed to help corporations link branch offices or consolidate remote LAN's into a central network. These routers allow network managers to take advantage of cost-effective Frame Relay and switched services (such as X.25 or ISDN) to create simpler, less expensive, and more manageable networks. Danube Family - Branch office, Internet access, Intranet access. Ideal for branch offices wanting a connection to a corporate location or for Internet access the Danube offers a wide range of features in a small compact design. The Danube can deliver full routing support for all commonly used protocols. Congo Family - Telecommuting, SOHO access, Internet access. The Congo family has three options that include the Congo Voice, Congo Data and Congo Corporate. All can be installed and fully configured within minutes making them ideal solutions for the small office or home office business users in need of ISDN connectivity to regional or corporate locations or for connection to the Internet.
RS232 Async IP Routers IPR Range of IP Routers - The IPR series of IP Routers are compact, cost effective solutions for LAN IP sharing, remote access, or LAN-to-LAN routing.
Ethernet Switches FD1360A - 4 slot switching chassis. Different media modules can be placed into the FD1360A including, 1 port Gigabit module, 4 port 100BaseFX fibre module and an 8 port 10/100Mbps UTP module. The unit has a large switching fabric of 5.2Gbps usually only associated with expensive 'high end' switches. FD1620-24 - 24 Port 10/100Mbps Nway Fast Ethernet switch. 1U high and rackmountable the FD1620-24 offer powerful features including vLAN support and port trunking. FD816 - 16 port 10/100Mbps Nway Fast Ethernet switch. 1U high and 19" rackmountable the FD816 is extremely compact and can accommodate 8K MAC addresses and 3Mb of buffer memory. FD821 - a desktop 8 port 10/100Mbps Fast Ethernet switch. Ideal for bringing dedicated bandwidth to power users. The compact FD821 has a huge MAC table and extensive buffer memory.
Ethernet Hubs FD1600-16 / FD1600-24 - 16 and 24 Port 10/100Mbps Dual speed stackable Ethernet hubs. The 10/100Mbps dual-speed stackable hubs deliver reliable and fast network connectivity for power workgroups and other bandwidth-demanding environments. FD800DS - 8 Port 10/100Mbps Dual speed Ethernet hub. The FD800DS can be implemented in any small business, remote office or workgroup. It's dual speed ability makes the FD800DS an ideal option when upgrading from 10Mbps Ethernet to 100Mbps Fast Ethernet. PN510 / PN810 - 5 and 8 port 100Mbps Fast Ethernet hubs. The PN510 / PN810 are 5 and 8 Port 100Mbps mini hubs. Ideal for small workgroups requiring dedicated 100Mbps Fast Ethernet connectivity. PN900T - The PN900T comprises of 8 10Mbps UTP ports and single BNC port. Ideal for connecting 10Mbps workgroups to legacy BNC segments.
Ethernet Media Converters 10Mbps stand alone Ethernet converters - The CC-2000 series of 10Mbps stand alone Ethernet media converters provide cost effective conversion of all media associated with 10Mbps Ethernet. 100Mbps stand alone Fast Ethernet converters - The CFT series of 100BaseTX to 100BaseFX converters have been designed to overcome the distance limitations associated with twisted pair cabling. The CFT series provide a simple cost effective method of gaining access to fibre segments of your LAN. 100Mbps Fibre to fibre media converters - The CFC series of 100Mbps fibre to fibre converters allow users to incrementally extend their fibre optic network transmission range. By providing interconnection between standard multi mode and longer ranged single mode fibre types. 1000Mbps Gigabit Ethernet converters - The GFC series of 1000Mbps Gigabit Ethernet converters enables the user to benefit from the increased bandwidth of Gigabit Ethernet while overcoming the distance limitations associated with 1000Mbps data speeds. 16 Slot 19" Rackmountable converter chassis - The CCM-1600 is a 16 slot modular, 19" rack mountable, multi-media converter chassis ideally suited for the communications room environment. Supporting up to 16 independant channels, the user can transparently link backbone equipment such as switches, routers to LAN work group segments.
Ethernet Transceivers 100Mbps Fast Ethernet Transceivers - The CFX / CTX series of 100Mbps Fast Ethernet transceivers offer a simple and effective method of connecting to a hosts MII (media independent interface) port. 10Mbps Ethernet Transceivers - Lanode's FP-1000 range of Ethernet transceivers provides an easy method of connecting an Ethernet host to network cabling.
Ethernet Network Interface Cards 10/100Mbps PCI Bus Ethernet Adapter - The FD1002-TX Fast Ethernet adapter is a high performance 10/100Mbps adapter based on an advanced platform. 10Mbps PCI Bus Ethernet Adapter - The PN0456-T is a high performance Ethernet adapter that is NE2000 compatible. The Ethernet adapter is based upon an industry standard PCI local bus specification 2.0, that features plug and play functionality, making it fully auto-configurable. 10Mbps ISA Bus Ethernet Adapter - The PN1720-BT is a 16 bit ISA bus, jumperless NE2000 compatible Ethernet adapter which complies with the ISA plug and play specifications.
DSL and Fibre Modems 2Mbps DSL Modems - The AM2048-CAP DSL modem has the technology to deliver full duplex transmission at 2Mbps over 2 or 4 wire twisted pair cable. The AM2048 DSL modem sets new standards in the distance available at 2Mbps using DSL technology. 2Mbps Fibre Optic modem - The AM2048-O is a fibre optic driver capable of providing 2Mbps over 60Km singlemode fibre or 15Km multimode. It delivers full duplex transmission at fractional 2Mbps, clear channel 2Mbps or n x 64Kbps. 1Mbps DSL Modems - The AM1024 is a 1Mbps DSL modem designed to drive full duplex data over unconditioned copper loops such as those meeting BT EPS-8 and EPS-9. 512Kbps DSL Modems - The AM512 has the ability to drive full duplex data at speeds of up to 512Kbps using a 2 wire circuit such as those meeting BT EPS-9. 128Kbps Baseband Modems - The AM1024 is a 1Mbps DSL modem designed to drive full duplex data over unconditioned copper loops such as those meeting BT EPS-8 and EPS-9. Rackmount DSL Chassis - The AM-DSL-RACK is a 19" rack mountable chassis that can house up to 12 of the AM series of Baseband and DSL modem cards.
Interface Converters G.703 / G.704 Converters - The ETU-01 is a single port access unit for 2Mbps E1 access or fractional n x 64Kbps access. The ETU-01 has a single 75 Ohm G.703 BNC port and supports a wide variety of interchangeable interface modules including, X.21, V.35, RS530, RS449 and an Ethernet 10BaseT bridge module. E1 / T1 Converters - The G.703 FTEC is a E1 / T1 converter and timeslot cross connect which enables conversion between one E1 signal and one T1 signal. Tests and diagnostics can be easily performed from the front panel push switches. V35 to X.21, RS449 and RS530 Converters - An range of V.35 interface converters that allow full conversion between V.35 and the above interfaces. RS232 to X.21, V.35 and RS449 Converters - A range of RS232 interface converters that allow full conversion between RS232 and the above interfaces. RS232 to RS442 / RS485 Interface Converters - The IC4851P series of interface converters allows full conversion between RS232 and RS444 / RS485. The '1P' series of converters work without an external power supply but provision is made if necessary. RS232 Short Haul Modems - The IC2321P series of , asynchronous, short haul modems, overcome the limited distances of the RS232 standard by converting RS232 DCE / DTE equipment to full duplex 2 twisted pair wire (CAT3 or better). RS232 Current Loop Converters - The ICCL-II interface converters allows full conversion between RS232 and current loop hardware. Installation is achieved by connecting the interface cable and selecting the DCE/DTE type with the function switches. Terminal Server / Serial Access - The STE-10 Terminal server / Serial Access Unit is a low cost, compact, serial access server or terminal server for connecting asynchronous serial devices (RS-232) over Ethernet (10Base-T) using the TCP/IP protocol stack. Serial / Parallel Converters - The SPX and SP/PS converters provide serial to parallel conversion in both bi-directional and uni-directional units. All the converters feature TTL or CMOS compatible 36 pin Centronics interfaces. The RS232 interface is a standard DB25 connector Serial / Parallel Line Boosters - The RS232-SLB and CEN01-PLB are line boosters designed to provide extra transmission length for serial RS232 and Parallel Centronics interfaces. Ethernet to X.21, V.35, RS449 and RS232 - The ET-10A is a low cost high performance remote Ethernet bridge. The ET-10A may be implemented on any Ethernet network allowing LAN traffic to be bridged rather than routed across a WAN link.
Multiplexers Ethernet Wave Division Multiplexers - The CWM series of wave division multiplexers provide the user with the ability to aggregate either two 10/100Mbps signals (copper or fibre) or two 1000Mbps Gigabit signals onto a single fibre pair. Voice & Data 2Mbps E1 Multiplexers - The ETU-02-MUX provides an economical multiplexing solution for E1 and fractional E1 network services. Up to four DTE devices may be linked to the ETU-02-MUX at data rates from 56Kbps to 2048Kbps.
G.703 E1 / T1 Products G.703 / G.704 Converters - The ETU-01 is a single port access unit for 2Mbps E1 access or fractional n x 64Kbps access. The ETU-01 has a single 75 Ohm G.703 BNC port and supports a wide variety of interchangeable interface modules including, X.21, V.35, RS530, RS449 and an Ethernet 10BaseT bridge module. Rackmount G.703 / G.704 Converters - The ERM-01 19" Rackmount chassis is 4U high and supports upto 13 fractional G.703 E1 cards. Each card has a single fractional G.703 port (either 75 Ohm BNC or 120 Ohm twisted pair) and a choice of a DTE port (X.21, V.35, 10BaseT, RS530, and RS449). E1 / T1 Converters - The G.703 FTEC is a E1 / T1 converter and timeslot cross connect which enables conversion between one E1 signal and one T1 signal. Tests and diagnostics can be easily performed from the front panel push switches. Voice & Data 2Mbps E1 Multiplexers - The ETU-02-MUX provides an economical multiplexing solution for E1 and fractional E1 network services. Up to four DTE devices may be linked to the ETU-02-MUX at data rates from 56Kbps to 2048Kbps. 2Mbps Fibre Optic modem - The AM2048-O is a fibre optic driver capable of providing 2Mbps over 60Km singlemode fibre or 15Km multimode. It delivers full duplex transmission at fractional 2Mbps, clear channel 2Mbps or n x 64Kbps. Transmission (E1 / T1) Analysers - The BTM10 series of E1 / T1 analysers are compact, notebook sized PCM measuring instruments designed for field use in analysis and maintenance of E1 (2.048Mbps) or T1 (1.544Mbps) lines.
Fibre Line Drivers 2Mbps Fibre Optic modem - The AM2048-O is a fibre optic driver capable of providing 2Mbps over 60Km singlemode fibre or 15Km multimode. It delivers full duplex transmission at fractional 2Mbps, clear channel 2Mbps or n x 64Kbps. RS232 Fibre Line Drivers - The FIB-232/ST is a low cost, compact, fibre converter designed to extend RS232 transmissions up to 2Km over multimode fibre optic cabling. RS422 / RS485 Fibre Line Drivers - The FIB-422/ST is a low cost, compact, fibre converter designed to extend RS422 / RS485 transmissions up to 2Km over multimode fibre optic cabling. ISDN Optical Line Drivers - The LD6320 allows a single ISDN2 circuit to be transported over Multi mode fibre up to 1Km in length.
Test and Analysis LAN Cable Testers - The LCT-300 and LCT-400 are the perfect solution to testing installed cable and patch leads. Their careful design offers the user a flexible approach to the testing of all types of twisted pair and BNC cabling. Protocol Analysers - The HCT series of notebook sized communication testers are protocol analysers and bit error rate testers that provide a wide range of protocol support suitable for equipment installations, on-line, off-line diagnostics, debugging and interface development. Transmission (E1 / T1) Analysers - The BTM10 series of E1 / T1 analysers are compact, notebook sized PCM measuring instruments designed for field use in analysis and maintenance of E1 (2.048Mbps) or T1 (1.544Mbps) lines. Analogue Line Testers - The ALT Series of Hand-held Transmission Testers combines the functions of a transmission line measurement (TIMS) instrument, a digital multimeter measurement (DMM) instrument and the function of a telephone handset with dial / talk / listen capabilities. Breakout Boxes - A range of breakout boxes for X.21, V.35 and RS232(V.24). Each unit is furnished with a wide range of LED's to monitor all major circuits of the interface under examination.

for enquiries and orders call +44 (0) 1276 677220