CT-4604

4.6Mbps DSL Modem + Ethernet Bridge / Router

Features

• 4.6Mbps Operation over 2 pairs of copper
• 2.3Mbps Operation over 1 pair of copper
• Built in bridge / router and 4 port Ethernet switch
• Fully G.SHDSL Compatible (G.991.2 A / B)
• Full ATM Protocol stack over SHDSL
• Configuration via - Web (HTTP), Telnet, VT-100

In Detail

Operating at speeds of up to 4.6Mbps the CT-4604 utilises the latest in G.SHDSL line coding. The CT-4604 combines DSL technology with an IP router and an integrated 4 port 10/100Mbps Ethernet switch. DSL connections are made using a 2 or 4 wire circuit such as those meeting the BT EPS-8 or EPS-9 standard.

The 4 port Ethernet switch allows multiple Ethernet devices to be connected to the modem. Each port on the switch can auto negotiate its speed and duplex mode. The CT-4604 can function as a transparent learning bridge that will pass extended length Ethernet frames such as those used in VLAN tagging applications. Routing functions can be enabled to route IP traffic using RIP or static routes.

Configuration and management of the CT-4604 is provisioned via a number of interfaces including Web based management, Telnet and an RS232 console port. The CT-4604 can also be configured as a DHCP server for easy IP address management. In summary the CT-4604 enables the connection of remote LAN's using ordinary telephone cable at speeds up to 4.6Mbps in either a bridged or routed environment.

Available in the range

CT-4605: 11.4Mbps G.SHDSL Ethernet Bridge / Router
CT-4602: 2.3Mbps G.SHDSL Ethernet Bridge / Router.
CT-2300A: 2.3Mbps G.SHDSL Ethernet Bridge / Router

Lanode, in partnership with CTC Union Technologies