SHDTU03b-ET100 2/4 Wire G.SHDSL.bis TDM (Bridge) NTU
The SHDTU03-ET100 offers a 10/100Base-TX interface which works over an SHDSL interface. The Ethernet interface provides Ethernet over TDM services by way of a HDLC encapsulation and RJ-45 connector. The data rate of Ethernet I/F may be up to 2.304Mbps with one pair copper wires. The SHDTU03-ET100 can be configured and managed via EOC, or menu-driven VT100 compatible Async. terminal Interface, either locally or remotely.
Features:
- Supports 10Base-T and 100Base-TX over SHDSL
- Standard ITU G.991.2
- Fast and cost-effective services of data on a single or two wire pair of existing copper loop infrastructure
- Wetting current to protect copper line (optional)
- Local management interface with console
- Remote line loopback
- G.SHDSL Line performance monitoring (data rate and SNR)
- Raw and per time interval statistics
- For use in conjunction with BT's EPS8 and EPS9 circuits
Specifications:
SHDSL Interface:
- Line code: 16 level Trellis coded PAM
- Line data rate: User selectable from 64kbps to 2.304Mbps
- Support: ANSI (Annex A) and ETSI (Annex B)
- Support wetting current: 4mA-20mA and alarm on failure
- Compliance: ITU-T G.991.2
Ethernet Interface:
- Supports 10/100Base-T auto sensing half/full duplex
- Complied with IEEE 802.3/IEEE 802.3u
- Operates as a self-learning bridge in transparent mode
- Supports up to 128 MAC learning addresses
- Supports bridge filter function
Performance: SHDSL PM : ES-crc, SES-crc, UAS, LOSW seconds
Management: Configuration with keypads and LCD display; Console port (RJ45 , RS232); Support firmware upgradeable
Indications: LEDs (PWR, SHDSL, 10M/ACT, 100M/ACT, COL, TEST, LOOP, ALARM, and FAR ALARM)
Power Input: AC Input: 100~240VAC; DC Input: -36 ~ 72VDC; Dual power Input: 100~ 240VAC, -36 ~ -72VDC
Power Consumption: < 10W
Dimensions: 168 x 195 x 48mm (D x W x H)
Weight: 850g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10~90% non-condensing
Certification: CE, FCC, RoHS
MTBF: 57,000 hrs (25°C)
