10G Long-Haul Transponder & Repeater
The 10G Transponder Module with FFI and XFP are used as 10G or OC-192/STM-64 signal repeaters, long haul extenders and as DWDM transponders. The transport modules consist of the Long-Haul transponder and the Repeater Module. The Transponder support OC-192/STM-64 and 10 GBE LAN on the client side and G709 on the line side. Repeater support all 10G protocols from 9.95 Gbps to 10.709 Gbps, including 10GBE LAN PHY, WAN PHY and OC-192/STM-64. The Long-Haul module can be used to transport 10G traffic in metro regional and Long haul DWDM networks. Configured with an ITU DWDM optic it can be connected directly to a DWDM Mux of an existing WDM system and transport additional data at 10G rate over an additional wavelength. The FEC reduces the number of transmission errors on noisy links and enables deployment of longer optical spans. Thus, it improves transport performance and drastically increases bandwidth capacity at low cost.
Features:
- 10G Transponder for short and long haul applications
- Supports OC-192/STM-64, 10GbE LAN PHY and WAN PHY
- Client XFP interfaces
- Performs full 3R (reamplification, reshaping, retiming) signal regeneration
- XFP or FFI line interface (1310nm, 1550nm or DWDM)
- Link distances up to 250km without in-line amplifiers
- G.709 line rate with Forward Error Correction (long-haul transponders)
- Digital Diagnostic Monitoring and SNMP or MICROSENS NMP management
- Remote management through embedded 10Mb DCC (long-haul transponders)
- Hot swappable
- Wire speed performance with low latency and jitter
NB: There is also a 10G Transponder Module with 2x XFP version available.
