Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Fibre Optic Converters 10/100 Ethernet Fast Ethernet In-band Managed Converter

Fast Ethernet In-band Managed Converter

E-mail Print

Fast Ethernet In-band Managed Converter

Fast Ethernet In-band Managed Converter

The FRM220-10/100i is a 10/100Base Ethernet to 100Base-FX fibre slide-in card converter designed for central and remote applications. With advanced features like bandwidth control, this media converter is targeted for customer premises equipment in metro LAN, campus, enterprise and FTTx applications. By offering in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc.

When used on its own the unit operates as a 'standard' 10/100 converter. When used in conjunction with the NMC management card access to management and monitoring features becomes possible. Additional features such as forcing the speed and duplex, or the ability to rate limit traffic traversing the converter become available. The remote FRM220-10/100i(s) can also be configured via an embedded communications channel contained within the fibre link. Link loss forwarding and enabling or disabling the converter can be configured too as well as monitoring the health and status of the copper and fibre ports on both the local and remote converters. Digital diagnostics are supported in SFP cards showing further characteristics of the optical link.

10/100BaseTX to 100BaseFX Fibre Optic Media Converter diagram

Features:

  • 10/100Base-TX to 100Base-FX Converter
  • Auto-Negotiation or forced mode
  • Supports remote CPE power fail detect (dying gasp)
  • Supports Far End Fault
  • Supports Link Fault Pass through (LFP)
  • Supports Loop Back Test
  • Supports RMON counter
  • D/D function for supported SFP fibre transceiver
  • Auto Laser Shutdown (ALS)
  • Auto MDI/MDIX
  • Forward 2046 bytes (max.) packets in switch mode
  • Forward 9K jumbo packets in converter mode
  • Supports Q in Q double tagged frame transparent
  • Supports IEEE 802.1q Tag VLAN pass thru
  • Supports local / remote In-band management
  • (Monitor and Configure) by the SNMP manager.
  • Bandwidth control (Nx32K or Nx512Kbps)
  • Support flow control (Pause)
  • Fibre Hardware Reset (FHR)
  • Online local / remote f/w upgrade
  • Must be placed in managed chassis to realize any management features

Specifications:

Optical Interface:

  • Connector: 1x9 (SC, ST, FC) or SFP LC
  • Data rate: 100Mbps
  • Duplex mode: Full duplex
  • Fibre: MM 50/125μm, 62.5/125μm; SM 9/125μm
  • Distance: MM 2km, SM 15/30/50/80/120km; WDM 20/40/60/80km
  • Wavelength: MM 1310nm, SM 1310,1550nm; WDM 1310Tx/1550Rx (type A); 1550Tx/1310Rx (type B)

Electrical Interface:

  • Connector: RJ45
  • Data rate: 10Mbps, 100Mbps
  • Duplex mode: Half / Full duplex
  • Cable: 10Base-T Cat.3, 4, 5, UTP; 100Base-TX Cat.5, 5e or higher

Standard: IEEE 802.3, IEEE 802.3u, TS-1000
Indications: LED (Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link)
Power Input: Card : 12VDC, Standalone : AC, DC options
Power Consumption: < 4W
Dimension: 155 x 88 x 23mm (D x W x H)
Weight: 120g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 65,000 hrs (25°C)