FMUX-01

16 Channel E1, T1 and Datacom Fibre Optic Multiplexer

Features

• 19" Rackmountable and 1U high
• Multiplex up to 16, 2Mbps channels over fibre
• Interfaces available - G.703, X.21, V.35, RS530 or Ethernet Bridge
• Dual AC and DC Power options
• Redundant Fibre 1+1 protection
• Setup via front panel LCD, VT-100 or SNMP
• Auto laser shutdown (ALS)
• Provides alarm indicators for major and minor alarms
• Link distance up to 120 Km
• Local and remote Loop-back functions

In Detail

The FMUX-01 is a highly flexible, compact fibre optic multiplexer. 1U high, fully modular and with the ability to multiplex up to 16 2Mbps circuits over fibre, the FMUX-01 provides a system that can be tailored and expanded to meet future demands of the network.

From the rear of the chassis, one to four quad E1, T1, datacom (V.35, X.21, RS-530), or Ethernet Bridge cards are supported. All line cards provide completely transparent transmission of E1, T1, datacom, or Ethernet regardless of frame mode or timeslot assignment.

The FMUX-01 can be fitted with a wide array of fibre optic transport modules, from short range 2Km multimode to long range 120Km singlemode. Each fibre module is available with 1+1 protection to ensure high availability of service. The FMUX-01 can also be equipped with WDM (wave division multiplexing) modules for transmission across a single core of fibre.

The FMUX-01 can be AC or DC powered with the option of dual power supplies.

The FMUX-01 is managed via a VT-100 RS232 port or via an optional Ethernet management module that supports Telnet and SNMP. Alternatively, the FMUX-01 can be managed via the front panel LCD and function keys. The FMUX-01 can be remotely managed from a local unit using the embedded communication channel contained within the fibre link.

Lanode, in partnership with CTC Union Technologies