| |
|
|
|
Framing - Unframed
Bit Rate - 2048Kbps
Line Code - Either HDB3 or AMI
Line Impedance - 75 Ohm BNC or 120 Ohm Twisted pairs (RJ-45)
Jitter Performance - According to CCITT G.823
ITU Standards - G.703, G.706, G.732
Datacom Interfaces
Interface types - V.35, X.21, RS530, RS449, RS232
Data Rate (each channel) - n x 64Kbps (64 to 2048Kbps)
Line Code - NRZ
Clock modes - Transparent, recovery, external, internal
Physical
Height - 43mm (1.75")
Width - 438mm (17.25")
Depth - 251mm (9.875")
Weight - 4.5Kg (10 lb.) net
Power
Voltage AC source - 90 - 250 VAC
Voltage DC source - 20 - 60 VDC
Frequency - 47 to 63 Hz for AC power
Power consumption - 40 VA
Environment
Temperature - 0-50o/32-122oFC
Humidity - 0-90% non-condensing |
|
Framing - Unframed
Bit Rate - 1544Kbps
Line Code - B8ZS
Line Impedance - 100 Ohm Twisted pairs (RJ-45)
Jitter Performance - According to CCITT G.824
ITU Standards - G.703, G.706, G.733
Ethernet Bridge Interfaces
Interface type - 10BaseT, 100BaseTx (RJ-45)
WAN data rate - 8192Kbps
Compliance - IEEE802.3, IEEE802.3u
LED Indicators
Power - 2 Power LED's, indicate status of each Power supply
Optical - 2 Optical LED's, indicate the status of the fibre link
Channel - 16 LED's indicate the status of each channel
Minor Alarm - Indicates a 'Minor' alarm has occurred
Major Alarm - Indicates a 'Major' alarm has occurred
Far end error - Indicates a 'Far end' error has occurred
Near end error - Indicates a 'Near end' error has occurred
System Failure - Indicates a failure in the system - i.e. Fibre LOS
E1 - E1 active or E1 Signal Loss
T1 - T1 active or T1 Signal Loss |
|
|
|
|
| |
|
|
FMUX-01: Multiplexer Chassis, 4 User Slots, 1 Fibre Slot
FMX-01-AC: Single AC Power supply
FMX-01-AC2: Dual AC Power supply
FMX-01-DC: Single DC Power supply
FMX-01-DC2: Dual DC Power supply
FMX-01-AD: One AC and One DC Power supply
FMUX-01-E1/BNCI/F: Quad E1 module - 4 x G.703 75 Ohm BNC
FMUX-01-E1/RJ45I/F: Quad E1 module - 4 x G.703 120 Ohm RJ-45
FMUX-01-T1/RJ45I/F: Quad T1 module - 4 x G.703 100 Ohm RJ-45
FMX-01-V35I/F: Quad V.35 module
FMX-01-X21I/F: Quad X.21 module
FMX-01-530I/F: Quad RS530 module
FMX-01-449I/F: Quad RS449 module
FMX-01-232I/F: Quad RS232 module
FMX-01-EthernetI/F: Single port 10/100BaseTX module
FMX-01-SST002: Single port fibre module - Multimode, ST, 2Km
FMX-01-RST002: Dual port fibre module - Multimode, ST, 2Km, 1+1 Protection
FMX-01-SFC120: Single port fibre module - Singlemode, FC, 120Km
FMX-01-RFC120: Dual port fibre module - Sinlgemode, FC, 120Km, 1+1 Protection
FMX-01-SNMP: Management Module - Telnet and SNMP
FMX-01-CLKI/F: External Clock Interface |
|
|
