PacketBand TDM-4G

Specifications

Technical Specification

Power

Internal supply
Standard IEC connector
Auto-sensing, 100-240VAC 15W
Max consumption 0.13Amps RMS @ 223VAC

Dimensions/ Environment

Metal chassis and font/rear panels
Dimensions(WxDxH): 292 x 200 x 44mm
Weight: 1.07kg
Temperature: 0-45oC
Humidity: 10-90% non-condensing

Supported LAN/WAN Protocols

Ethernet 802.3
Ethernet VLAN IEE 802.1Q
IPv4
ARP
TCP (for remote management)
IPv6 (Q3 05)
ICMP (ping)

User selectable TDM Protocols

Y.1413 (TDM over MPLS)
UDP/RTP
PWE3 CESoPSN (draft)
Metro Ethernet (MEF CES Requirements)

Ethernet Interfaces

Standard RJ45 connectors
4 ports with integrated Ethernet switch
1 Ethernet/IP to the network and 3 local Ehternet ports
10/100Base-T
Full duplex
Auto-negotiation

E1 TDM

RJ45 connector
Presents as DCE
1 to 4 ports
120 Ohm balanced
75 Ohm unbalanced via balun
G.703 2.048Mbps
G.704 structured full or fractional (31x64/nx64)
ITU G.706
Software selectable CRC4 or non-CRC4 framing (multiframe or doubleframe)
Line coding HDB3

T1 TDM

RJ45 connector
Presents as DCE
cross cable as DTE
1 to 4 ports
100 Ohm balanced (T1)
1.544Mbps
T1 structured full or fractional
T1 clear unstructured
G.704
ESF or D4 framing software selectable
B8ZS or AMI Line code selectable