Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Interface Converters Serial Async RS232 to RS422/RS485, RJ-45 Interface Converter

Async RS232 to RS422/RS485, RJ-45 Interface Converter

E-mail Print

IC485IP Async RS232 to RS422/RS485, RJ-45 Interface Converter

Async RS232 to RS422/RS485, RJ-45 Interface ConverterEnd of Life

The IC485IP Interface Converters provide asynchronous conversion between RS-232 interface and RS-485 standard interface. The RS-232 interface connection is via the unit's DB-25 female connector, while the RS-485 side's  connection is via either a five screw terminal block or an RJ-45. The IC485IP converters circuitry is not electrically isolation between the RS-232 and RS-485 sides. The RS-232 side may operate as DTE or DCE, has provisions for establishing hardware flow control, and has LEDs to indicate data transmission and reception. The RS-485 side may operate in either two wire half duplex or four wire half or full duplex and also has LED's to indicate data transmission and reception.

Async RS232 to RS422/RS485, RJ-45 Interface Converter schematic

Features:

  • Electrically converts ASYNC RS-232 to RS-485/422
  • Baud rate up to 128kbps
  • DCE/DTE switch selectable
  • RTS/CTS control, full/half duplex
  • Simulation/monitor select switch

Specifications:

Data rate: Up to 128Kbps
Connector: RS232: DB25F, RS485: 4 screw terminals block (IC485IP-1), RS485: RJ-45 connector (IC485IP-2)
Indications: LEDs (TD, RD, External DC Power)
Power Input: Interface Powered or External DC 9V in
Power Consumption: < 5W
Dimensions: IC485IP-1: 54 x 76 x20mm (D x W x H)' IC485IP-2: 54 x 56 x 20mm (D x W x H)
Weight: 60g
Temperature: 0°C ~ 50°C (Operating), -10°C ~ 70°C (Storage)
Humidity: 10~90% non-condensing