RS232 Data Interface Converter

Print

RS232 Data Interface Converter

RS232 Data Interface Converter

The RS232IP family of interface converters allows full bi-directional synchronous conversion between RS-232C (V.24) and V.35, X.21 or RS-449/530 hardware. These converters all work WITHOUT an EXTERNAL POWER SUPPLY. The RS232IP interface converters are designed for synchronous RS-232 operation at data rates up to and including 128kbps. They may also be applied to asynchronous RS-232 using only TD & RD signals, while ignoring TC, RC, and XTC timing signals.  Asynchronous RS-232 requires three times greater data throughput on the synchronous side's V.35, X.21 or RS-449/530 interface. The physical connections for all RS232IP family converters are DB25 female with standard pin out, while a cable adapter is required for V.35, X.21 or RS-449/530 side. All three models may be interchanged as long as the correct V.35, X.21 or RS-449/530 cable is applied.

RS232 Data Interface Converter schematic

Features:

Specifications:

Data rate: Up to 128Kbps
Connector: DB25F with V.35, X.21, RS530, RS449 cable adapter
Indications: LEDs (PWR, Signal status, DCE/DTE mode)
Power Input: 9VDC
Power Consumption: < 5W
Dimensions: 140 x 80 x25mm (D x W x H)
Weight: 150g
Temperature: 0°C ~ 50°C (Operating), -10°C ~ 70°C (Storage)
Humidity: 10~90% non-condensing