Gigabit Fibre Optic Multiplexer
The FMUX1000S is an innovative gigabit multi-service fibre optic transport system which can transmit both E1/T1 and Ethernet data streams over redundant gigabit fibre optic links. The gigabit wire-speed Ethernet traffic and a separated 16 E1/T1 transparent data are multiplexed into 1.25Gbps by using a patented physical coding method to achieve a high performance and economic broadband access solution.
The FMUX1000S can be adopted as a broadband backhaul of 3G mobile networks or private network access for campus and
office building. FMUX1000S is a modular design which supports E1/T1 and combo Ethernet interface cards. There are 4 hot
swappable tributary slots equipped for each FMUX1000S system. The Ethernet tributary card is equipped with two 10/100/1000 RJ45 and two Gigabit SFP fibre ports, These 4 ports are part of 4 gigabit ports in an Ethernet switch core. For E1/T1 card, the 4 E1/T1 ports can be programmed as either E1 or T1 individually. Any combination of Ethernet and E1/T1 cards can be placed in the four plug-in slots.
Features:
- Wire-speed GbE traffic and separated 16E1 data are transmitted simultaneously
- 1Gbps throughput for aggregate Ethernet traffic
- Supports advanced Ethernet interface features like jumbo frame size(9K bytes), Provider Ethernet bridge by VLAN stacking (QinQ, IEEE802.1ad), QoS and traffic rate control
- Supports various loopback and BERT for system diagnosis
- 1+1 protection switch and Automatic Laser Shutdown[ALS] for aggregate fiber interfaces
- Built-in EOC channel for OAM&P
- Supports VT100, Telnet, SNMP and client server based NMS interfaces
- Loss of Power indication for power failure of the remote unit
- Remote software upgradable
- Supports order-wire for craft person’s voice communication
- Supports one RS-232 Async. channel for auxiliary data communication
- AC and DC power redundancy
- Form C relay contacts for audible and visible alarm outputs
- Comply with the specifications of class A of CISPR 22 and class A of FCC Part 15 Subpart B Rules of U.S.A
- Comply with the electrostatic discharge immunity (ESD) IEC 61000-4-2 level 2
- RoHS Compliant
Overall Specifications for the FMUX1000S Gigabit Fibre Optic Multiplexer:
System
System capacity: Any combination of E1/T1 and Combo Ethernet cards for 4 x hot swappable tributary plug-in slots. E1/T1 4ch, 8 ch,12 ch Max.16ch or GbE combo ports 2ch, 4ch, 6ch, Max.8ch
Aggregate Ethernet throughput: 1 Gbps wire-speed
Aggregate – Gigabit Optical Interface
Number of port: 2, 1+1 protection
Line rate: 1.25G bps
Optical central wavelength: 1310 nm nominal
Connector type: LC (SFP housing)
Management
Console Port: Electrical: RS232, DCE Protocol: VT-100 Connector: DB9, female
Telnet: Access via SNMP Ethernet port
SNMP: SNMP v1, v2c; Up to 3 Trap IPs
Management: Embedded operations channel over fibre
Loss of Power: Loss of power indication for remote unit
Auxiliary Data Channel: 300 – 115200 bps , RS232C
Order-wire: 300 – 3.4K Hz voice channel, RJ11 4 wire telephone handset interface
Alarm
Alarm History: Alarm Type (i.e. RAI, AIS, LOS,RDI, LOF, AIS, CV, ES, SES, UAS, LPR, AOC)
Alarm Queue: Maximum 100 alarm records which record the latest alarm type, location, and date & time
Alarm Threshold: CV, ES, SES, UAS
Power
AC Module: 90 to 240 VAC, 60 +/- 3Hz
48 VDC Module: -42 to -56 VDC
Redundancy: AC+DC, DC+DC or AC+AC
Power Consumption: Max. 20W per system
Physical & Environment
Dimensions: Standalone: 441x 445x 320 mm, Rack: 430x 355x 370mm (W x H x D)
Temperature: 0 - 45°C (shelf) or 0 - +65 °C @ 10 – 90 % RH, Non condensing (Outdoor)
Mounting: 19 inch standalone desktop stackable and rack mount
Certification
EMC: EN55022 Class A, EN55024, FCC Part 15 Class A
Safety: EN60950-1, IEC60950-1
Standards Compliance
ITU-T: G.703, G.704, G.823, G.826
IEC: 61000-4-5 class 3
IEEE: 802.3, 802.3u, 802.3z, 802.3x, 802.1q, 802.1ad (Q-in-Q)
IETF: RFC 1643, RFC 1157, RFC 1213, RFC 1406, RFC 2863
The 4 x E1/T1 4-Channel Port Cards for the Gigabit Fibre Multiplexer is modular PCAs which slide into the Gigabit fibre Multiplexer chassis and provide four completely independent ITU-T G.703 E1 or T1(DS1) interfaces. The PCA module terminates with a DB25F connector that is designed to connect to a physical adapter. The adapter is available in two options,
one, with 4 pairs of BNC connectors for E1 75 Ohm unbalanced connections and the other with four RJ-45 jacks for E1 120 Ohm balanced or for T1 100 Ohm balanced connections. The 4 x E1/T1 card can be programmed as either E1 or T1 individually.
Specification:
E1 frame: PCM31,PCM31C,PCM30,PCM30C and unframed, Framed ( ITU-T G.703 and G.704 standard) Line Code HDB3
Rates: 2.048Mbps+/-50ppm
Output Signal: ITU-T G.703
Input Signal: ITU-T G.703
Impedance: 75 ohm unbalanced or 120 ohm balanced, software programmable
Jitter requirements: Meet ITU-T G.823
Connector: DB25 (optional DB25 to RJ45 or BNC connector available)
Channel: 4 channels E1 per cacrd
Surge Protection: IEC 61000-4-5 class 3
The Gigabit Ethernet tributary card is equipped with 2 ports 10/100/1000 Base-T and 2 ports 1000Base-X SFP slots. The complete functions included Ethernet Bridge, VLAN stacking (QinQ, IEEE802.1ad) , Jumbo Frame packet, IEEE 802.1q VLAN, BPDU packet and Pause Frame transparency, Packet classification based on the 802.1P, 4 priority queues for packet classification, Strictly Priority or WRR Scheduling of the 4 priority queues and bandwidth control: 256Kbps, 512Kbps, 5Mbps and 50Mbps for different ranges of port speed.
Specification:
T1 frame: SF, ESF and unframed, field selectable, Meet ITU-T G.703 and G.704 standard
Line Code: AMI / B8ZS(selectable)
Rates: 1.544M bps ± 50 ppm
Output Signal: DS1 with 0, -7.5, -15 dB LBO
Input Signal: DS1 with 0 dB to -26 dB ALBO
Impedance: 100 ohm , balanced
Pulse Template: Per AT&T TR 62411
Connector: DB25 (optional DB25 to wire-wrap connector available)
Channel: 4 channels T1 per card
Surge Protection: IEC 61000-4-5 class 3
The E1/T1 plus Gigabit Ethernet tributary card is equipped with 2-port 10/100/1000 Base-T or 2-port Gigabit SFP slot plus E1/T1 4-Channel Port .The G.703 E1 or T1(DS1) interfaces module terminates is available in two options, one, with 4 pairs of BNC connectors for E1 75 Ohm unbalanced connections and the other with four RJ-45 jacks for E1 120 Ohm balanced or for T1 100 Ohm balanced connections. The 4 x E1/T1 can be programmed as either E1 or T1 individually.
Specifications:
Standard: Comply with 802.3, 802.3u, 802.3ab and 802.3z
Data rate: 10/100/1000Base-T for twisted pair GbE, 1000Base-X for optical GbE
Connector: RJ45 for twisted pair GbE and LC (SFP) for optical GbE
No. of ports: 2 x RJ45 and 2 x SFP combo / 2 x RJ45 / 2 x SFP
