Lanode.com

DWDM - 10G Optical Transport System

10G Optical Transport System DWDM platform for 10 Gigabit Ethernet Switching and SDH-Networks

The MICROSENS 10G Dynamic, Multi-Reach Transport system is a next generation optical transport platform that provides DWDM and CWDM on a single system that addresses Metro, Regional, and Long Haul applications. The MICROSENS 10G platform handles rates from 100 Mbps to 40 Gbps and can scale to 100 Gbps. It supports 80 DWDM channels at 10 Gbps. It consists of a 6 U chassis for high density applications and a compact 2 U chassis for low density applications. The platform includes optical multiplexers (Mux/DeMux), reconfigurable optical add/drop multiplexers (ROADM) and optical amplifiers (OA). Mux and DeMux filter modules are designed in a modular fashion to accommodate channel growth without service interruption. The 10G Platform supports a wide variety of services today and the special technology enables it to adapt to meet future service requirements quickly and cost effectively.

10G Chassis 6 U

The MS430502M is a 6 U, 19“ modular chassis that can hold 19 standard-size modules in addition to the management card. Both chassis are 600 mm wide and 300 mm deep and are ETSI compliant. The chassis hosts also two horizontal drawers dedicated to the mandatory FAN module and an optional optical Mux/DeMux shelf. With the mount kit provided, use a 19" (48.3 cm) equipment rack, correctly grounded and secure. The chassis may also be installed in a 23" or ETSI rack with the aid of suitable extension brackets. The power supply is provided with -48V 5 meters long cables.

10G Chassis 2 U

The MS430500M is a 2 U, 19“ modular chassis. It can hold 5 standard-size modules in addition to a pluggable management card. Modules are hot swappable. These carrier class chassis' offer dual redundant and load sharing DC power supplies and have removable fans and dust filter. An AC power option is available as a plug-in module in the 2 U chassis. With the mount kit provided, use a 19" (48.3 cm) equipment rack, correctly grounded and secure. The chassis may also be installed in a 23" or ETSI rack with the aid of suitable extension brackets. The power supply is provided with -48V 5 meters long cables.

10G Long-Haul Transponder & Repeater

The 10G Transponder Module with FFI and XFP are used as 10G or OC-192/STM-64 signal repeaters, long haul extenders and as DWDM transponders. The transport modules consist of the Long-Haul transponder and the Repeater Module. The Transponder support OC-192/STM-64 and 10 GBE LAN on the client side and G709 on the line side. Repeater support all 10G protocols from 9.95 Gbps to 10.709 Gbps, including 10GBE LAN PHY, WAN PHY and OC-192/STM-64. The Long-Haul module can be used to transport 10G traffic in metro regional and Long haul DWDM networks. Configured with an ITU DWDM optic it can be connected directly to a DWDM Mux of an existing WDM system and transport additional data at 10G rate over an additional wavelength. The FEC reduces the number of transmission errors on noisy links and enables deployment of longer optical spans. Thus, it improves transport performance and drastically increases bandwidth capacity at low cost.

Quadruple 4G Repeater

The Quadruple 4G Repeater module has eight SFP slots that provide the highest port density on a single card. The eight ports of the Transponder are split to four pairs of access and line ports creating four WDM transponders on one card. By plugging an access SFP and a CWDM or DWDM SFP, each module can deliver four WDM channels. Up to five modules can be installed in a MS430500M chassis providing 20 wavelengths in a 2 U shelf. All ports of the module support any protocol from 100 Mbps to 4 Gbps including Fast and Gigabit Ethernet, OC-3/12/48, STM-1/4/16, GBE, 1/2/4G Fibre Channel. It is ideal for sub 10G applications that require transport of multiple OC-48 and GBE traffic. The Transponder is most commonly used as CWDM or DWDM transponder. It can also be used as a repeater in long haul networks. The module supports any SFP type and can reach distances of 100 km and beyond with 1550 nm or DWDM wavelength. Combined with MICROSENS amplifiers, SFP optics can have extended reach.

2.7G 3R Repeater Module

The 2.7G 3R Repeater Transponder supports any transport protocol including Ethernet, SONET, SDH, or Storage on its ports. It can be used as a WDM transponder or as a repeater and regenerator. In a typical WDM transponder application it is configured with a short reach SFP on the client port and a CWDM/DWDM SFP on the line port. Plugged with 2 long haul WDM SFPs, the module can be used in regeneration sites of long haul networks. The module supports any SFP type and can reach distances of 100 km and beyond with 1550 nm or DWDM wavelength. Combined with MICROSENS optical booster and pre-amplifier, SFP optics can achieve link distances of up to 250 km and up to 700 km with in-line amplifiers. Digital Diagnostics Management (DDM) is supported for both SFP interfaces.

10G 8x Gigabit TDM

The 8 port Gigabit TDM aggregates via time-division multiplexing (TDM) up to eight channels into a 10G Gigabit data stream and supports both Gigabit Ethernet and 1G Fibre Channel. Thus the transmission capacity of a 10G system can be significantly increased and maximized. The transmission on the line side can be achieved with standard XFP modules, or even with integrated DWDM Fixed Fiber Interfaces (FFI). For redundant or ring applications, the line interface can also be redundant. With the optional FEC-function (Forward Error Correction) great distances of 120 km and more can be achieved. For the exchange of network management information, the module has an integrated 10 Mbps data channel (in-line remote management), which will be transferred without restriction of the eight 1 Gigabit channels and is used for the coupling of the management modules via Ethernet. In addition, this Ethernet channel may be used for service purposes.

10G 4 Port STM-16 TDM Module

The 10G 4 port STM-16 TDM Multiplexer Module is a part of the 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional plug-in unit offering the aggregation and transport of four telecom transparent services (OC 48/STM-16) onto a 10 Gb/s G709 OTU2 signal. The line bit rate can be G.709, OC-192/STM-64 or standard SONET/SDH signal. The module can be managed through SNMP or MICROSENS Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP, XFP and FFI interfaces. The TDM Multiplexer module occupies two slots in the MICROSENS chassis and is powered through the backplane of the chassis.

10G 5 Port 2G Fibre Channel TDM

The 10G 5 port Gigabit Fibre Channel TDM Multiplexer Module is a part of the 10G Transport Platform, a high performance and flexible carrier-class transmission system. The module is a bidirectional device offering the aggregation and transport of up to 5 datacom client ports (GbE, GFC, 2GFC) onto a 10 Gb/s signal. The module can be managed through SNMP or MICROSENS Network Management Platform (NMP). Digital Diagnostics Monitoring (DDM) is supported for SFP, XFP and FFI interfaces. The module includes advance management, product modularity, and high availability at a very attractive price. The 2 U chassis accepts up to 2 modules which allow the interconnection of up to 10 x 2GFC/GFC via 2x 10G between two data centres with a distance of 80 km. The module occupies two slots in the MICROSENS chassis and is powered through the backplane of the chassis.

10G 4 HD-SDI Video TDM Module

The 10G Video TDM module aggregates up to four HD-SDI or SD-SDI channels with one GBE and one FE on one 10 Gbps wavelength. Multiple wavelengths can be muxed together with WDM (Wave Division Multiplexing) and transported over fibre. Each video port auto-senses between SDI, HD-SDI-PAL, HD-SDI-NTSC signals and is individually configurable.  It aggregates up to four HD-SDI or SD-SDI with one GbE and on eFE on one 10 Gb/s wavelength. The aggregation module eliminates the need for network edge elements such as SDI encoders and ATM switches that are traditionally required for native video transport. Furthermore, it simplifies the carrier network and reduces the operational cost of managing new and complex network elements. The module is hot-swappable and takes 3 slots in a MICROSENS chassis. On the Client side it uses Coaxial BNC interfaces for SDI ports, a standard RJ-45 port for FE and SFP for the GBE port. On the Line side, it uses XFP or FFI (40km, 60km and 80kms B&W or DWDM) or tunable FFI interfaces. The Aggregation and Transport module is also available with a second Line interface that provides 1 + 1 protection.