Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home TDM over IP PacketBand PacketBand-TDM8

PacketBand-TDM8

E-mail Print

PacketBand-TDM8

PacketBand-TDM8

The PacketBand-TDM8 is a highly-featured 2U chassis supporting 8 E1/T1 circuits delivered across different types of packet networks (“TDM over IP” or “CESoP”). PacketBand excels in delivering stable and accurately clocked E1/T1 “leased lines” over various types of packet networks. A single PacketBand-TDM8 chassis can support up to 8 E1/T1 circuits in G.704 or G.703 mode. These circuits can be connected to other chassis and/or to stand-alone smaller PacketBands such as the various single and 4 port units.

PacketBand-TDM8 diagram

E1/T1 circuits can be individually configured with no constraints. Reconfiguring one E1 does not impact upon any other port or services running across it. The system also supports “grooming” whereby a single E1 can support multiple remote low-speed devices, such as the PacketBand-TDM-VX which delivers V.35 and V.11/X.21 services. PacketBand-TDM8 can support up to 8 links as standard but can, when running multiple links into a single channelised port (grooming), optionally support up to 128.

PacketBand-TDM8 schematic

Features:

  • Highly accurate and stable clock recovery processes maintains end-to-end synchronisation
  • G.823 Synchronisation Mask levels of accuracy achievable
  • Dual load-sharing hot-swappable AC/DC PSUs
  • Inter-works with smaller PacketBand units and the 16/32 port chassis.
  • Support for:
    o Clear-channel and channelised
    o G.704 Grooming
    o External clock sources
    o RSTP
    o LACP
    o UTP and fibre (SFPs)
    o “Jumbo” packets
  • Enhanced Multicast clocking mode for larger networks
  • “Tuneable” algorithms to match network characteristics
  • Various clocking options to suit different network types
  • Compact 2U chassis mounts 300mm deep
  • All interfaces front presenting
  • Robust, reliable and professional quality
  • Excellent management, network visibility, diagnostic and statistics

Cards and Interfaces:

All cards are front insertable. The chassis supports:
One or two PSUs

  • AC and DC options are available
  • “Hot-Swappable” according to the ATCA PICMG 3.0 specification
  • One PSU supports a full chassis
  • Front insertable

Ethernet Card
Standard Card

  • 1 x SFP cage
  • 2 x RJ45 UTP

Optional Card

  • 2 x SFP cages
  • 2 x RJ45 UTP

Terminal Card
Standard Card

  • 1 x RJ12 control port
  • 1 x RJ12 alarm relay

Optional Card 1

  • 1 x RJ12 control port
  • 1 x RJ12 alarm relay
  • 2 x RJ45 external clock inputs 2.048Mbps HDB3

Optional Card 2

  • 1 x RJ12 control port
  • 1 x RJ12 alarm relay
  • 2 x RJ45 external clock inputs 2.048Mbps HDB3
  • 2 x 50 Ohms BNC 10MHz external clock sources

2.4 E1/T1 Card

  • Each card supports 8 user-switchable E1/T1 interfaces
  • The chassis supports two cards
  • RJ45 connectors
  • 120 Ohm and user-switchable to 75 Ohm (I/O conversion cable required)
  • Full E1/T1 or full/fractional G.704
  • Front insertable

Clocking:

Clock recovery, accuracy and stability is key to many TDM applications and the clock recovery performance must be maintained when migrating to a packet network solution. Many types of equipment expect similar performance to that of traditional leased lines which are generally referenced to the G.823 Synchronous Interface mask. The PacketBand range is specifically designed and optimised to excel in this area and when used on high-quality networks can meet and exceed the G.823 requirements. The clock recovery methods use a variety of mechanisms. These include sophisticated algorithms which allow users to “tune” the performance to match the network characteristics; after all, networks differ greatly – an extreme example being between the public Internet and a private managed network supporting Quality of Service (QoS).

Ethernet and Packet Handling:

  • Support for 10/100/1GE.
  • Support for “Jumbo-packets” up to 10,240 bytes in size.
  • Single MAC and IP address, Default Gateway and SubNet Mask, support for DHCP. Disordered packets are reordered automatically.

Prioritisation

  • TDM packets can be assigned IP Diffserv (DSCP) or ToS and 802.1p CoS values.
  • PacketBand supports full 802.1q tagging and the associated 802.1p CoS prioritisation levels.
  • All egress packets including TDM links can be prioritised across four output queues using CoS (802.1p) or Diffserv/ToS values.

VLAN Handling
PacketBand’s powerful and latest-generation on-board packet switch offers advanced 802.1Q VLAN facilities such as multiple TAGing, TAG insertion/removal, port routing based on default TAG or a Global TAG table. Egress packets can be TAGed, have multiple TAGs or be stripped of TAGs according to configuration. PacketBand also supports Provider Mode whereby customer packets are TAGed for transport across the network with the TAGs being removed before passing back to the customer at the far end.

Link Aggregation Control Protocol (LACP)
This powerful optional feature enables two or more Ethernet ports to be connected between PacketBand and the network switch and for the links to be aggregated together as defined in LACP IEEE 802.3-2005. This aggregation makes it appear as if the multiple links are acting as a single high capacity circuit. Furthermore, it adds an important level of redundancy with automatic rerouting.

Rapid Spanning Tree Protocol (RSTP)
RSTP (as defined in IEEE 802.1D-2004) identifies the means to build an Ethernet network which contains phyical loops between bridges. This facility enables PacketBands to be connected to more than one network switch via different circuits and to provide an automatic fall-back in the case of a link failure.

Rate Limiting
Individual packet ports can have the traffic capacity restricted in various ways, even though the access is 10/100/1GE. This is particularly useful on the second Ethernet port when connected to user LANs where the main link to the network could be “swamped” by data from attached devices.

Management:

PacketBand can be locally or remotely configured using easy-to-use high functionality DbManager GUI software. DbLite is supplied free with each unit. Optionally available are different versions to support requirements for larger or more integrated networks. It is sophisticated but simple to use via an intuitive Graphical User Interface (GUI) which controls, configures and monitors individual units and complete networks, currently Microsoft-based, it can also generate SNMP Traps and Alarms. The DbManager supplied with PacketBand (DbLite) allows control and visibility of a single PacketBand at any one time via a single PC. Other options support multiple real-time work-stations, a network of PacketBands and links, and have additional capabilities such as SNMP Traps & Alarms and continuous polling of devices. A document identifying the differences between DbLite and other versions is available.

Used by various organisations with different network sizes - up to and including carriers - versions of DbManager deliver a network wide view of all PacketBands and links via a 4-layer “tree structured” overview. The status of all PacketBands and links are easy to identify with Alarms being colour coded and passed up the tree. Separate windows provide Event and Alarm information with the ability for operators to add comments etc. Different access levels and passwords provide operators with appropriate capabilities within the program. An option to encrypt the management traffic across the packet network is available, together with a key management and update system. Demonstration software is available which illustrates both the
DbManager and the PacketBand features. Please ask for more information.

Specifications:

A. Clock Recovery
Advanced algorithms tunable for different network characteristics as standard. Capable of exceeding G.823 Synchronous Interface requirements (subject to network performance)

B. TDM Card

  • 8 x RJ45 connectors
  • Presents as DCE (crossed cable for DTE)
  • 1 x LED with various states per interface
  • Support for E1 and T1 on a per-port basis.

E1

  • 120 Ohm
  • 75 Ohm unbalanced via converter cable
  • G.703 unstructured
  • G.704 channelised
  • ITU G.706
  • Selectable CRC/CRC4
  • HDB3 encoded
  • Transparent to user signaling

T1

  • 100 Ohm
  • Unframed 1.544Mbps
  • Framed 1.536Mbps (robbed-bit)
  • ESF or D4 selectable
  • B8ZS or AMI selectable
  • Transparent to user signaling

C. Ethernet Card
Standard card

  • 1 x standard SFP cage
  • SFP “enabled” warning LED
  • Default to 1GE
  • Options for 10/100 and single fibre modules
  • 2 x RJ45 UTP ports
  • 10/100/1GE
  • Auto-sensing

Optional card
As above plus second SFP cage

D. Terminal Card
Standard card

  • 1 x RJ12 asynchronous control port.
  • For use by DbLite/DbManager [Remote management access also available via Ethernet LAN/WAN]
  • Speeds to 115kbps.
  • Dry contact Alarm Relay. Pins as below
  • 1 x RJ12 alarm port.
  • Dry-contact alarm relay: “Common” pin 5; “normally open” 6; “normally closed” 4

Optional card

  • As above plus
  • 2 x RJ45 external clock inputs – 2Mbit square wave or HDB3

Optional card

  • As above plus
  • 2 x BNC external clock inputs – 10MHz

E. Oscillator Performance*
Standard

  • Hold-over 24hrs 4ppb
  • Aging per day 0.5ppb
  • Temperature Stability 14ppb

Oven

  • Hold-over 24hrs 10ppb
  • Aging per day 0.3ppb
  • Temperature Stability 10ppb

(* Figures based on typical parts and performances. Individual oscillators may vary slightly either way. Temperature Stability range -5DegC to +70DegC assumes 20 minutes from power on. Aging and holdover at constant temperature)

F. Power Supplies

  • TDM8 supports 1 or 2 supplies these are hot swapable to ATCA. 1 Supply can power a fully populated chassis.
  • AC - Auto-sensing 96VAC – 240VAC, Max consumption 0.5A RMS @230VAC
  • DC - 4mm terminal Block, 36VDC tp 57VDC, 1.2A max

G. IP & MAC Address

  • Single MAC address, IP address, subnet mask and default gateway
  • Support for DHCP

H. Configuration
Held in non-volitile memory

I. Realtime Clock
For time-stamping Events and Alarms

J. Dimensions and Environment

  • Metal chassis and front/rear panels: W – 225; D – 320 (300 from mounting); H-88mm
  • Weight – 9.7Kg max
  • Operating temperature -20°C to +55°C radiated cooling
  • Humidity 10-90% non-condensing
  • Optional cooling fans for higher temperature environments

K. Maintenance

  • There are no serviceable parts or maintenance required.
  • Real-time battery-backed clock life in excess of 7 years.

L. Approvals

  • EMC
  • EN55022:1988
  • EN55014:1988
  • EN61000-3-2/3:1995
  • AS/NZ CISPR22:2000
  • FCC Part 15(B)
  • CE marked
  • RoHS compliant

M. Safety

  • EC EN60950-1:2002
  • ACA TS001:1997
  • ACS/NZ60950:2000
  • AS/NZ3260:1993
  • IEC950

N. Telecomms (optional)

  • 8 port E1/T1 card
  • TBR12/TBR13
  • TBR4/TBR3
  • TIA/E1A-1S/968
  • TNA117
  • AS-ACIF S006/S016
 

How can we help?

Search

Live Demo of FRM220 Chassis

Related Products