CT-4604 - 4.6Mbps DSL Modem + Ethernet Bridge / Router
4.6Mbps Operation over 2 pairs of copper 2.3Mbps Operation over 1 pair of copper Built in bridge / router and 4 port Ethernet switch Fully G.SHDSL Compatible (G.991.2 A / B) Full ATM Protocol stack over SHDSL Configuration via - Web (HTTP), Telnet, VT-100

Operating at speeds of up to 4.6Mbps the CT-4604 utilises the latest in G.SHDSL line coding. The CT-4604 combines DSL technology with an IP router and an integrated 4 port 10/100Mbps Ethernet switch. DSL connections are made using a 2 or 4 wire circuit such as those meeting the BT EPS-8 or EPS-9 standard.

The 4 port Ethernet switch allows multiple Ethernet devices to be connected to the modem. Each port on the switch can auto negotiate its speed and duplex mode. The CT-4604 can function as a transparent learning bridge that will pass extended length Ethernet frames such as those used in VLAN tagging applications. Routing functions can be enabled to route IP traffic using RIP or static routes.

Configuration and management of the CT-4604 is provisioned via a number of interfaces including Web based management, Telnet and an RS232 console port. The CT-4604 can also be configured as a DHCP server for easy IP address management. In summary the CT-4604 enables the connection of remote LAN's using ordinary telephone cable at speeds up to 4.6Mbps in either a bridged or routed environment.

Ordering

Part Number Description CT-4604 4.6Mbps G.SHDSL Modem + Ethernet Bridge / Router

Specifications

Routing IP routing - Static or RIP v1 / v2 NAT and PAT DHCP server DNS relay

Bridging IEEE 802.1D Transparent Bridging Spanning tree protocol Supports IP and PPPoE packet filtering

Configuration / Management Local Console RS-232 Telnet Access Web Based GUI (HTTP) Password control

Software upgrade TFTP Download

ATM ATM cell over SHDSL , AAL5 Support for UBR, CBR, VBR-nrt & VBR-rt VPI range (0-4095) & VCI range (1-65535) Support OAM F4 / F5 loopback Payload Encapsulation RFC2684 (RFC1483) multi-protocol over ATM RFC2225 (RFC1577) IPoATM RFC2364 PPPoATM (Support for CHAP and PAP) RFC2516 PPPoE

WAN Interface SHDSL - ITU-T G.991.2 (Annex A / B) Encoding scheme - TC-PAM Data Rate - 144Kbps to 4.6Mbps rate adaptive Impedance 135 Ohms

Hardware Interfaces WAN - 1 x RJ-11 LAN - 4 x RJ-45 10/100BaseTx Console Port - RS-232

LED Indicators PWR - Indicates power on ACT - Indicates activity Link - Indicates LAN link WAN - Indicates DSL WAN link Alarm - Indicates Alarm status

Physical / Electrical Dimensions - 18.7 x 3.3 x 14.5 cm (W x H X D) Power - 100-240 VAC Power consumption - 6W Temperature - 0 - 45 oC Humidity - 0% - 95%

for enquiries and orders call +44 (0) 1276 677220

| Home | Catalogue | Products | New Products | Profile | Datasheets | E-mail |

© LANODE Ltd 2004 | last updated - 21/04/04 | version 2.00