ML680 / ML680D / ML680Dx Ethernet Switches
The Actelis Networks ML680 family of cost efficient, compact, hardened Ethernet switches is optimized for delivering up to 100 Mbps of Carrier Ethernet services over 8 pairs of bonded copper and/or fibre. The ML680s are extremely flexible platforms which support drop and continue, as well as linear and ring topologies. They are ideal for a variety of private enterprise, intelligent traffic network, and service provider applications. With its superior performance, environmental hardening, small form factor, and fanless DIN rail mount design, the ML680 Ethernet switch can be installed almost anywhere and provides high performance broadband over bonded copper.
Supporting an extensive set of standards-based Carrier Ethernet features, the ML680’s MEF compliance ensures both service interoperability and multi-vendor interworking. The ML680 features include support for 802.1q VLANs, multi-QoS, and Ethernet OAM, supports up to eight Ethernet interfaces, and allows for multiple data networking devices, video cameras, wireless radios and other IP devices to be connected at each location. The ML680 bonds up to 8 copper pairs and is powered by Actelis Networks’ unique EFMplus™ technology which ensures the best rate/reach performance and carrier-class reliability. Combined with Actelis' industry-leading XR239 EFM Repeaters, the reach can be extended even further.
The recently added ML680D platform extends the ML680 family with an ultra-compact small form factor, hardened, fanless design, that is mountable almost anywhere - ideal for rugged intelligent traffic system, surveillance, railway, utility, and industrial network applications.
Features:
- Support for two High Speed Copper Links
- Small form factor, no fan, DIN railing
- Environmentally hardened
- IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution
- CE 1.0
- Rapid Service Deployment
- Superior Rate, Reach & Reliability
- Low Delay and Jitter for Voice and Video Transmission
- Carrier-Class OAM
- Worldwide Spectral Compliancy
- FCC, UL, CE, NEMA 4
Specifications for ML684D as an example only:
Ethernet (Network/User) Interfaces:
- 10/100Base-T: 6 ports, Connector: RJ45, Auto-MDIX
- 100/1000Base-FX: 2 ports, Connector: SFP based, MSA compliant
High Speed Link (Bonded Copper Pairs):
- Protocol: IEEE 802.3ah 2Base-TL
- Line code: ITU-T G.991.2 rev. 2
- Bandwidth per HSL: 1 HSL - up to 60 Mbps; 2 HSLs up to 30Mbps
- Number of Copper Pairs: 4, Connector: RJ45 x 2
- Number of HSLs: 1 HSL- up to 4 pairs, 2 HSLs- east/west, 2 pair each
- End-to-end Delay: 2-4 ms (typical)
- Spectral Compliance: ITU-T G.991.2 (Annex A, B, F, G) ETSI TS 101 524 (Annex E) ANSI T1.417, T1.426 Per-country regulatory compliant spectral modes
- Sealing Current: 48VDC/1.5mA nominal
Management (Out-of-Band):
- 10/100Base-T: Connector: RJ45, Auto-MDIX
- Craft: EIA RS-232 (DCE), Connector: RJ45
Alarm Contacts: Terminal Block, 2 Input, 1 Output
LAN Protocols:
- Dynamic Bridging: IEEE 802.1, 8K MAC addresses
- Discovery Mechanisms: LLDP
- VLAN Tagging: IEEE 802.1Q
- Double Tagging: Q-in-Q
- RSTP, STP: IEEE 802.1d
- Link Aggregation: IEEE 802.3ad
- Provider Bridges: IEEE 802.1ad
- IGMP snooping: IGMP V1/V2
- OAM: IEEE 802.3ah clause 57 (EFM OAM), IEEE 802.1ag, ITU Y.1731, Ethernet loopback with MAC swap
Management Protocols:
- SNMP: SNMP V3, V2C, V1
- IP addresses: IPV4 and IPV6
- Command Line Interface: TL1, Industry Standard CLI
- Remote Access: Telnet
- Secure Access (option): SSH v2
- Time Synchronization: SNTP v3
- Web Access: HTTP
- File transfer: FTP, TFTP
- IEEE 802.3ah EFM OAM: Dying Gasp
- User Authentication: RADIUS and/or local passwords
Management Applications: EMS: MetaASSIST EMS; Craft GUI: MetaASSIST View
Quality of Service: Classes of Service: 4; Scheduler: WFQ, SP; Classification: L2 802.1p/Q priorities, L3 ToS/Diff Serv
Front Panel Indicators (LEDs): Power; Status; Alarm; MLP per modem/pair; ACT (Activity); LNK (Link) per Ethernet/HSL port
Alarm Contacts: Terminal Block: 2 Input, 1 Output
Dimensions: Height: 5.95” / 151 mm, Depth: 5.1” / 130 mm, Width: 2.3” / 58 mm
Weight: 1.76 lbs / 0.8 kg
Mounting Rack: Din Rails, Wall Mount Design for top hat rail EN 50022 – 35 × 7.5, or 35 × 15 - type O / type Omega (Ω)
Power: DC: -24/-48 VDC nominal, 9 Watt; AC: 90-264 VAC
Operating Temp: -40° to +74°C*
Storage Temp: -40° to +75°C
Relative humidity: Up to 95%, non-condensing
Metro Ethernet Forum: CE1.0 - MEF 9, 14
Safety: UL 60950, CSA C22.2 60950; EN 60950, IEC 60950
EMC: FCC Part 15 Class A; ICES-003 Class A; ETSI EN 300 386 Class A; ETSI ETS 300 132-2; ITU-T K.21, K.45
CE: EMC and Safety
Environmental: ETSI ETS 300 019; NEMA 4 Thermal
(NB: Specifications for other products in the ML680 series are available on request so please contact us here)
