IFC-100PD Non-Managed PoE PD Converter

IFC-100PD Non-Managed PoE PD Converter

The IFC-100PD is Power over Ethernet 10/100Base-T(X) to 100Base-FX non-managed PD (Power Device) Fibre converter, which gives you the options to choose from the most popular fibre cabling connectors, ST, SC, FC. Both multi-mode and single mode converter models are available as well as BiDi which allows bi-directional transmissions using only a single fibre cable. With Power over Ethernet (PoE) feature, IFC-100PD takes power supply over Ethernet cable from PoE Ethernet Switch and may work without external power adapter. When auto-negotiation is selected, these units will automatically tailor themselves to convert both half-duplex and full-duplex signals, according to IEEE802.3u standards. LED indicators signal the power status of the converter, UTP port speed, Link, and duplex status, FX port Link and duplex status.

IFC-100PD Non-Managed PoE PD Converter schematic


  • 10/100Base-T(X) to 100Base-FX Converter
  • Auto-Negotiation or forced mode
  • Auto MDI/MDIX
  • Forward 1600 bytes (Max.) packets
  • Supports Q in Q double tagged frame transparent
  • Supports IEEE 802.1q Tag VLAN pass thru
  • Supports flow control (Pause)
  • Supports Link Fault Pass-Through (LFPT)
  • Forward 9K jumbo packets in converter mode
  • Supports IEEE802.3af Power over Ethernet


Optical Interface:

  • Connector: 1x9 (SC, ST, FC)
  • Data rate: 125Mbps
  • Duplex mode: Full duplex
  • Fibre: MM 50/125μm, 62.5/125μm. SM 9/125μm
  • Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
  • Wavelength: WDM 1310Tx/1550Rx (type A); 1550Tx/1310Rx (type B)

Electrical Interface:

  • Connector: RJ-45
  • Data rate: 10Mbps, 100Mpbs
  • Duplex mode: Half / Full duplex
  • Cable: 10Base-T Cat.3, 4, 5, UTP, 100Base-TX Cat.5, 5e or higher
  • PD Input Power: 48VDC

Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af
Indications: LED (Power, FX Link, TX SPD, TX Link, TX Duplex, FEF)
Power Input FMC: DC 12V In
Power Consumption: < 4W
Dimensions: 108 x 74 x 23mm (D x W x H)
Weight: 120g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, RoHS
MTBF: 65,000 hrs