S3290 SERIES - Remotely Managed NID with Built-in Traffic Generator
Transition Networks’ managed S3290 NID provides advanced packet performance metering and service creation directly at customer premises and cell sites. The S3290 is optimized for business Ethernet and mobile backhaul deployments. The S3290 is a multi-service NID that provides SLA-assurance and advanced fault management that is MEF CE2.0 certified. IEEE 802.1ag Service OAM, ITU Y.1731 Performance Monitoring and IEEE 802.3ah Link OAM are standard features. The S3290 supports advance features such as IPv6 and IPv4, VLANs, QoS, bandwidth allocation, ring protection, jumbo frames and numerous security features. The S3290 can be managed and provisioned with Transition Networks Converge™ EMS or via Web, CLI and SNMP (v1, v2c & v3). The product supports SSL/SSH, RADIUS, TACACS+, Management VLAN and ACL rules. The S3290 offers AC or DC power inputs for operation in a variety of environments. The SFP ports support 100Mbps, 1000Mbps or SGMII SFPs. CWDM and Bi-Di SFPs are also supported, allowing for flexible network architectures.
Features:
- 2 x 10/100/1000Mbps Base–T ports
- 4 x 100/1000Mbps SFP ports
- Any port can be network (NNI) or client (UNI)
- MPLS-TP
- SNMP v1, v2c, and v3
- IPv6 and IPv4 support
- VLAN (802.1Q) Q-in-Q (C-Tag / S-Tag)
- RMON and Syslog
- OAM Support:
- IEEE 802.3ah Link OAM.
- IEEE 802.1ag Service OAM and
- ITU Y.1731 Performance Monitoring
- Protection: ITU G.8032/G.8031; IEEE RSTP, MSTP
- IEEE 1588v2
- DC or AC power input
- Jumbo Frame Support (10K)
- Fan-less design
- Wire speed loopbacks
- RFC 2544 and Y.1564 Traffic Generation and Reports
Software Features:
- E-LINE (EPL and EVPL); E-LAN (EP-LAN and EVP-LAN); E-ACCESS (ACCESS EPL and EVPL)
- UNI or NNI configuration
- TOS/Diffserv
- Quality of Service (802.1p): 8 queues; strict priority and WRR, shaping, policing, P-bit and DSCP
- Management via Converge™ EMS, CLI, Web, SSH/SSL and SNMP (V1, V2, & V3)
- Port configuration, status, statistics and monitoring
- RADIUS, TACACS+ and ACL
- Remote backup / restore configuration; Remote firmware upgrades
- Alarms via Syslog & SNMP; Remote loopbacks
- L2CP; LLDP
- Diagnostic Monitoring Interface – SFF-8472
- Dying/Last Gasp
- Port Mirroring
- Link Aggregation Control Protocol (LACP)
Specifications:
Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP, (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3ah Link OAM, IEEE 802.1ag SOAM FM, IEEE 1588-2008 (v2) Precision Time Protocol (PTP), ITU G.8261 Synchronous Ethernet ITU Y.1731 PM
Maximum MAC Addresses: 8K
Maximum VLAN's: 4k
Maximum Frame Size: 10,000 bytes (10K)
Data Rate: Copper ports (RJ-45): 10/100/1000 Mbps; SFP ports (empty): 100/1000 Mbps or SGMII
Status LEDs: Power, Port Activity and Port Duplex
Dimensions: Width: 5.95” [151.13 mm]; Depth: 6.5” [165.1 mm]; Height: 1” [25.4 mm]
Input Power: AC: 12 VDC via barrel connector using 100-250VAC; Redundant DC: 21-60VDC via terminal block
Environment:
- -20°C to +65°C operating temperature
- 5%– 95% humidity non-condensing
- -40°C to +85°C storage temperature
Safety Compliance: UL listed, CE, EN55022 Class A
Warranty: 5 Year Hardware
