C2110 Series - FE Media Converter 100BASE-TX to 100BASE-FX
The ION C2110 device provides an interface between 100Base-TX ports and 100Base-FX ports allowing users to integrate fibre optic cabling into 100Base-TX copper environments.
Features:
- Auto-Negotiation of speed and duplex on TP port
- AutoCross ™ on TP port
- Link Pass Through (LPT1) fault monitoring
- Far-End-Fault (FEF) detection
- Automatic Link Restoration
- Pause advertisement
- Field Upgradeable Firmware
- Can be used in any ION Platform Chassis
- Standards based, will link with any Standard 100Base-TX and any Standard 100Base-FX ports
Specifications:
Standards: IEEE Std. 802.3
Data Rate: 100 Mbps, Layer-1
Switches:
- SW1: Auto-Negotiation (UP = enabled)
- SW2: Pause (UP=enabled)
- SW3: Link Pass Through (UP = enabled)
- SW4: Far-End-Fault (UP = enabled)
Internal Jumpers: AutoCross™: Enable/Disable
Hardware/Software Jumpers:
- Hardware: Mode of operation is determined by the settings on the 4-position switch
- Software: Mode of operation is determined by the most recently saved on-board microprocessor settings
Status LEDs:
- PWR (Power): ON = Connection to powered backplane
- LKC (Copper Link): ON = Copper Link
- RXC (Receive Copper): Blinking = Data recieved on Copper link
- LKF (Fibre Link): ON = Fibre Link
- RXF (Receive Fibre): Blinking = Data received on Fibre Link
Dimensions:
- Width: 0.86” [22 mm]
- Depth: 6.5” [165 mm]
- Height: 3.4” [86 mm]
Power Consumption: 2.5 Watts, 200 mA @ 13.9 VDC
Shipping Weight: 1 lb. [.45 kg]
Regulatory Compliance: CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty: Lifetime
