C3100-4040 - 100Mbps to 2.5Gbps Fibre Repeater with two open SFP slots
The C3100-4040, a fibre to fibre converter card is a protocol independent device that supports data rates from 100Mbps up to 2.5 Gbps. Installed in an ION chassis, it provides reliable and cost-effective conversion between single mode and multimode fibre, while also providing wavelength conversion in CWDM applications. As an SFP based device, this any-rate to similar-rate converter offers great application flexibility. Supported protocols, fibre connectors, and transmission distances are determined by the SFP module used on the converter.
Features:
- ION Chassis Card
- Protocol Transparent
- Supports data rates from 100Mbps to 2.5Gbps
- Any-rate to similar-rate conversion
- SFP to SFP Fibre Repeater
- Specific wavelength CWDM Transponder
- Supported protocols: Fast Ethernet, Gigabit Ethernet, SONET (OC-3/12/48), 1 & 2 Gig Fibre Channel, 2.5G InfiniBand, FDDI, ESCON/SBCON
- DMI, Digital diagnostics statistics available through ION Management Module
- Link Pass Through
- Auto Link Restore
Specifications:
Standards: Multi-Source Agreement (MSA); Small Form Factor Pluggable (SFP)
Data Rates: Protocol Independent; 100Mbps to 2.5 Gbps
Max. Frame Size: 16384 bytes Jumbo Frames Supported
Status LEDs:
- PWR ON (Green) = Power
- Port 1 Link ON = Fibre Signal Detected
- Port 2 Link ON = Fibre Signal Detected
Dimensions: Width: 3.25” (82mm); Depth: 6.5” (165mm); Height: 1.0” (25mm)
Power Source: External AC/DC required: 12VDC
Power Consumption: 2-3 watts, based on the SFP modules used
Environmental:
- Operating Temp: 0 to 50 C or see Chassis Specs
- Storage Temp: -40 to +85 C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 to 10,000 feet (with de-rating)
Shipping Weight: 2 lbs
MTBF: Greater than 250,000 hours (MIL-HDBK-217F); Greater than 687,000 hours (Bellcore)
Compliance: FCC Class A; EN55022 Class A, EN55024, CE Mark
Warranty: Lifetime
