C6010 Series - T1/E1 to Fibre Network Interface Device
The C6010 T1/E1 copper to fibre network interface device (NID) provides a solution for those users that need to extend T1/E1 connections over fibre. The T1/E1 supports Small Form Pluggable (SFP) transceivers to support a variety of fibre types, distances and wavelengths to provide maximum flexibility across a variety of network topologies. The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further increase the bandwidth capacity of the fibre infrastructure. The T1/E1 NID must be used in pairs. A typical installation will include a chassis card installed in the ION Platform locally and a stand-alone device installed at the remote location.
Features:
- Remote in-band management
- Local or Remote Loopbacks - Copper or Fibre
- Switch selectable for T1 or E1
- Remote firmware upgrade
- LEDs for immediate visual status
- Supports dual or single fibre
- Supports multimode and single mode fibre at a variety of distances
- Supports CWDM SFPs
- SNMP management when used with ION chassis and management module
- Remote standalone can be managed by local peer
Specifications:
Standards: ANSI T1.102, T1.402 and T1.408, ITU I.431, G.703. G.736, G.775 and G.823, ETSI 300-166, 300-233 and TBR12/12
Copper Connectors: RJ-48, BNC
Fibre Connectors:
- SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
- Fixed Optics: ST or SC connector
Data Rates: T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s
Status LED: Power, Signal Detect Copper, Signal Detect Fibre
Dimensions: W: 0.86” [22 mm]; D: 6.5” [165 mm]; H: 3.4” [86 mm]
Power Consumption: 2.6 Watts
Shipping Weight: 1.0 lb. [.45 kg]
Regulatory Compliance: CISPR/EN55022 Class A; FCC Class A; CE Mark
MTBF: Greater than 250,000 hours (MIL-HDBD-217F); Greater than 687,000 hours (Bellcore)
Warranty: Lifetime
