Fibre Optic Converters

FRM220-DS3/E3 over Fibre

FRM220-DS3/E3 over Fibre

The FRM220-DS3/E3 is a copper to DS3 /E3 fibre media converter designed for long-distance transport of DS3/E3 signals. The DS3/E3 supports Small Form Pluggable (SFP) which give you the options to choose from a wide range of standard SFPs in multi-mode and single mode types as well as BiDi which allows bi-directional transmissions using only a single fibre cable. CWDM wavelength SFPs can also be used to increase the bandwidth capacity of the fibre infrastructure. With SNMP and Web-based management in FRM220 chassis, the network administrator can monitor, configure and control the activity of FRM220-E3/D3 card in the chassis locally and a stand-alone device installed at the remote location.

FRM220-ET100  Ethernet over E1 Fibre Modem

FRM220-ET100 Ethernet over E1 Fibre Modem

The FRM220-ET100 is a single port Fibre WAN (TDM) card with built-in HDLC Bridge for the FRM220 Series Platform Media Converter Racks. The converter supports Nx64 data rates from 64Kbps up to 2.048Mbps when linked by fibre to FRM220-Data or FRM220-E1/T1 cards. The clock source may be selected internally or recovered from received fibre signal. The Ethernet port utilizes a single RJ-45 connector. When the FRM220-ET100 card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, Ethernet link status and alarms. The card can be configured to enable or disable the port, reset the card, set clocking, data rate and provide digital diagnostic loopbacks. A unique feature of the FRM220-ET100 is the use of a common card design which may either be inserted in the FRM220-CH01 single slot chassis as a stand-alone modem or as a card when placed in the FRM220-CH20 In-band managed rack.

FRM220-E1/T1 Fibre Optic Modem

FRM220-E1/T1 Fibre Optic Modem

The FRM220-E1/T1 is a fibre media transport for G.703 E1/T1 transmissions. The BNC model provides unbalanced 75 Ohm coaxial E1 connections while the RJ-45 model provides switchable balanced 120 Ohm E1 or 100 Ohm T1 connections over twisted pair wiring. When the FRM220-E1/T1 card is placed in the FRM220 rack with in-band management, the card status, type, version, fibre link status, E1 or T1 link status and alarms for both local card and remote unit can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests. When set for E1 mode, the FRM220-E1/T1 also supports fractional (structured) E1 when connected to a remote FRM220-Data, synchronous data communications converter. In an E1 transmission network where end connection requires synchronous data communication such as V.35 or RS-530 (X.21, RS-449), these units eliminate the need for an extra CSU/DSU. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switches.

OAM/IP-Based Managed GE Media Converter

OAM/IP-Based Managed GE Media Converter

The FRM220-1000EAS/X-1 is an IEEE802.3ah OAM compliant copper to fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-X with SFP. With SNMP and Web-based management in the FRM220, the network administrator can monitor, configure and control the activity of each IEEE802.3ah series card and remotely connected OAM compliant converter. By offering IEEE802.3ah OAM Compliant in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1Q, VLAN tag, Q in Q, IPX, IP, etc.

FRM220-1000DS 1000Base-X to 1000Base-X SFP media converter

1000Base-X to 1000Base-X SFP media converter

The FRM220-1000DS is a fibre to fibre optical media converter and repeater that allows data rates up to 1Gbps. FRM220-1000DS supports 2R regeneration, which consists of re-amplification and reshaping. This converter is compatible with fibre interfaces such as 100Mbps Fast Ethernet, 155Mbps STM-1, 4, Fibre Channel 1, 2, and OC3, 12, 24. The FRM220-1000DS works as an FRM220 slide-in card, while the FRM220-1000DS plus FRM220-CH01 work as a stand-alone fibre converter. When the FRM220-1000DS card is placed in the FRM220-CH20 rack with SNMP management, the management can view the converter card's status, type and fibre link status.

Gigabit Ethernet Managed Switch

Hardened Gigabit Ethernet Managed Switch

The FRM220A-1002ES is an industrial grade dual copper to dual fibre Gigabit Ethernet managed switch designed to make conversion between 10/100/1000Base-T and 100/1000Base-SX/LX with SFP connector. With SNMP and Web-based management in the FRM220 chassis the network administrator can monitor, configure and control the activity of each FRM220A-1002ES switch card locally via the SNMP manager, the functions including bandwidth control, QoS, VLAN, duplex and speed configuration. This managed switch is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, IPX, IP, etc.

Gigabit Ethernet OAM/IP In-band Media Converter

Gigabit Ethernet OAM/IP In-band Media Converter

The FRM220-1000MS is an IEEE802.3ah OAM compliant copper to fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and dual rate 100/1000Base-X with SFP LC connector. When deployed as a stand-alone solution, this media converter incorporates an easy to use Web user interface for operation, administration and maintenance of both local and remotely connected FRM220-1000MS converters. By offering 802.3ah OAM compliance, this converter can be linked to any 802.3ah compliant fibre switch and support loop back and dying gasp functions. When placed in our centrally controlled and  managed rack, all functions of this converter and the remotely connected converter can be configured and monitored via in-band management, including band-width control, duplex, speed, VLAN configuration and more.

Gigabit Ethernet Installation Switch 45x45

GBE Switch 45x45

The fanless Gigabit Ethernet Installation Switch is available in two versions for horizontal or vertical installation, providing full Gigabit Ethernet performance on an optical fibre uplink as well as on local copper ports. Robust and durable design with Gigabit connections directly contacted in the device, which allows short, electrical pathways (EMC). With the Power-over-Ethernet (PoE) Standard IEEE 802.3af end devices (e.g. VoIP telephones) can be supplied with data as well as power through the connected Twisted-Pair cable which means you don’t need an external power supply. Thanks to snap-in installation which doesn’t require any tools, the switch can be installed quickly and easily. This system, which is the most compact available, also ensures compatibility with standard international installation systems. The integrated management agent enables full configuration, monitoring and management of all devices in the network and extended functions such as VLANs, data prioritisation (QoS) and Power-over-Ethernet can be specifically assigned.

Gigabit Ethernet TDM Module

Gigabit Ethernet TDM ModuleGigabit Ethernet TDM Module Chassis

With the Gigabit Ethernet TDM module it is possible to double the capacity of Gigabit Ethernet. With the time division multiplexing (TDM) technology two Gigabit Ethernet data streams (2x 1.25 Gbps 1000Base-X) are combined to one channel (1x 2.5 Gbps). This aggregation is completely transparent for each Gigabit Ethernet channel. Switch features such as VLANs, stacked VLANs, Flow Control, buffer management etc. are not affected. The Gigabit Ethernet TDM is equipped with SFP slots for modularity of the optical interfaces. For xWDM applications the line interface can be equipped with a coloured SFP transceiver. For the installation into a 3 U or 4 U Modular Access Platform chassis, the adapter plate must be used. Each adapter plate occupies 6 slots and can hold 2 TDM Modules.

Dual Channel GBE In-band Converter/Switch + OAM/IP

Dual Channel 10/100/1000BaseTX to 1000BaseX with OAMEnd of Life Products

The FRM220-1000EAS is an IEEE802.3ah OAM compliant dual copper to dual fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector. With built-in SNMP and Web-based management, the network administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. By offering 802.3ah OAM Compliant in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc.

Gigabit Ethernet OAM/IP In-band Converter/ Switch

Gigabit Ethernet OAM/IP In-band Converter/ SwitchEnd of Life Products

The FRM220-1000EAS-1 is an IEEE802.3ah OAM compliant copper to fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector. With SNMP and Web-based management in the FRM220, the network administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. By offering 802.3ah OAM Compliant in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc. The FRM220-1000EAS-1 is a single copper to single optical converter while the 1000EAS-2F is a two optical port converter.

10/100Base-TX to 100Base-FX OAM/IP-Based Managed FE Media Converter

10/100Base-TX to 100Base-FX OAM/IP-Based Managed FE Media Converter

The FRM220-100AS-1 is an IEEE802.3ah OAM compliant copper to fibre Fast Ethernet Converter designed to make conversion between 10/100Base-TX and 100Base-FX with SFP. With stand-alone SNMP and Web-based management, the network administrator can monitor, configure and control the activity of each IEEE802.3ah series card and remotely connected OAM compliant converter. By offering IEEE802.3ah OAM in-band management, this converter can also be completely controlled and monitored from a centrally located managed rack. Based on a powerful L2 switch architecture, this converter supports  bandwidth control, duplex and speed configuration, VLAN tagging, Q-in-Q, QoS, Spanning tree as well as auto laser shutdown, link fault pass through, OAM loop back and dying gasp.

G.703

EDFA

Page 1 of 5

Explore the range

  2. Home
  3. Products
  4. Fibre Optic Converters

Live Demo of FRM220 Chassis

More Information

Name
0 (Min. 0 Characters)
Company Name
0 (Min. 0 Characters)
Your Email
Telephone
Message
0 (Min. 16 Characters)
Send Message

Joomla Forms makes it right. Balbooa.com

Recent Updates

Related Products