FRM220-100M Fast Ethernet OAM/IP In-band Media Converter
The FRM220-100M is an IEEE802.3ah OAM compliant copper to fibre Fast Ethernet solution designed to make conversion between 10/100Base-TX and 100Base-FX with SC, FC, ST connector. When deployed as a stand-alone solution, this media converter incorporates an easy to use Web user interface for operation, administration and maintenance of both local and remotely connected FRM220-100M converters. By offering 802.3ah OAM compliance, this converter can be linked to any 802.3ah compliant fibre switch and support loop back and dying gasp functions. When placed in our centrally controlled and managed rack, all functions of this converter and the remotely connected converter can be configured and monitored via in-band management, including band-width control, duplex, speed, VLAN configuration and more.
Features:
- 1 Port 10/100BASE-TX to 100BASE-FX Converter
- Auto-Cross over for MDI/MDIX in TP port
- Auto-Negotiation or Manual mode in TP port
- Dying gasp (remote power failure detection) on standalone unit
- Supports Link Fault Pass Through ( LFP ) Function
- Supports Auto Laser Shutdown (ALS) Function
- Supports flow control Enable or Disable
- Supports Jumbo Frame 9K Packet
- Ingress/Egress Bandwidth control
- Support 802.3ah-OAM/IP in-band management (for standalone unit only)
- Firmware upgrade via Web (for standalone unit only)
- Password Setting (for standalone unit only)
- Allow IP settings Web or Console management (for standalone unit only)
- Supports 16 Tag VLAN Group (for standalone unit only)
- RMON counters (for standalone unit only)
- Supports Double VLAN tag (Q-in-Q) on standalone unit
Specifications:
Optical Interface:
- Connector: 1x9 (SC, ST, FC)(Option)
- Data rate: 100Mbps
- Duplex mode: Full duplex
- Fibre: MM 50/125μm, 62.5/125μm. SM 9/125μm
- Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
- Wavelength: MM 1310nm, SM 1310,1550nm; WDM 1310Tx/1550Rx (type A); 1550Tx/1310Rx (type B)
Electrical Interface:
- Connector: RJ45
- Data rate: 10Mbps, 100Mbps
- Duplex mode: Half / Full duplex
- Cable: 10Base-T Cat.3, 4, 5, UTP, 100Base-TX Cat.5, 5e or higher
Standard: IEEE 802.3, IEEE 802.3u
Indications: LED (Power, FX-Link, LAN Speed, LAN Link )
Power Input: Card : 12VDC; Standalone : AC, DC options
Power Consumption: < 4W
Dimension: 155 x 88 x 23mm (D x W x H)
Weight: 0.12kg
Temperature: 0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 65,000 hrs
