Ethernet Aggregation Platform

Home

Products

Fibre Optic Converters

Ethernet Aggregation Platform

Inverse Multiplexer/Ethernet Switch Platform

FRM220A Inverse Multiplexer/Ethernet Switch Platform

Inverse Multiplexer/Ethernet Switch Platform

The FRM220A is a 2U high 19" Rack, 20 slot modular media converter rack, designed with one Gigabit Ethernet switch uplink, for efficient scalability and easy deployment in access networks. It provides an economic solution in high density fibre converter installations in enterprises or central offices. All critical components, Power, fans, management module and interface cards are hot swappable, allowing online field replacement. The hot-swappable power modules can be chosen from AC100-240V, DC18-36. or DC 36-72V. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis as one management unit.

Gigabit Ethernet Aggregate Switch

The FRM220A-GSW/SNMP is a 24+4 Gigabit Ethernet Switch. Twenty ports supply each slot of the 2U 20-slot chassis with an electrical gigabit Ethernet uplink with the remaining four electrical gigabit ports accessible via the rear of the chassis. The additional four ports are provided by SFP sockets. All eight gigabit ports (4+4) are usable without restrictions for uplink aggregate to the Ethernet Metropolitan Area Network (E-MAN). The FRM220A-GSW/SNMP card transmits Ethernet between the subscriber equipment (bridge/modem or network interface card) and the E-MAN. The card provides a user-networking interface with Ethernet packets. This card is capable of providing high bandwidth for assembling Ethernet traffic. The FRM220A-GSW/SNMP card is not only the system aggregate/trunk module, but also the system's control module, providing OAM Management functions.

iMux4 Inverse Multiplexer

The FRM220A-iMux4 is an E1 inverse multiplexer capable of bundling up to 4 E1 lines for cost-effective connection of 10/100Base-TX or 100Base-FX LANs over multiple E1 transports. The FRM220A-iMux4 inverse multiplexer transmits up to a 9.92Mbps Ethernet bridge channel (GFP-F encapsulated) over 4 E1 links. The FRM220A-iMux4 bridges the gap between E1 and E3, allowing bridges to operate at faster rates. It also provides high speed access to SDH/SONET backbones where the only access services available are E1 lines. The FRM220A-iMux4 supports an E1 attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The FRM220A-iMux4 fully meets E1 specifications including ITU-T G.703 and G.823. The FRM220A-iMux4 features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the FRM220A-iMux4 and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration.

iMux8 Inverse Multiplexer

The FRM220A-iMux8 is an E1 inverse multiplexer capable of bundling up to 8 E1 lines for cost-effective connection of 10/100BaseTX or 100Base-FX LANs over multiple E1 transports. The FRM220A-iMux8 inverse multiplexer transmits up to a 15.87Mbps Ethernet bridge channel (GFP-F encapsulated) over 8 E1 links. The FRM220A-iMux8 bridges the gap between E1 and E3, allowing bridges to operate at faster rates. It also provides high speed access to SDH/SONET backbones where the only access services available are E1 lines. The FRM220A-iMux8 supports an E1 attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The FRM220A-iMux8 fully meets E1 specifications including ITU-T G.703 and G.823. The FRM220A-iMux8 features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the FRM220A-iMux8 and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration.

iMux16 Inverse Multiplexer

The FRM220A-iMux16 is an E1 inverse multiplexer capable of bundling up to 16 E1 lines for cost-effective connection of 10/100BaseTX or 100Base-FX LANs over multiple E1 transports. The FRM220A-iMux16 inverse multiplexer transmits up to a 31.74Mbps Ethernet bridge channel (GFP-F encapsulated) over 16 E1 links. The FRM220A-iMux16 bridges the gap between E1 and E3, allowing bridges to operate at faster rates. It also provides high speed access to SDH/SONET backbones where the only access services available are E1 lines. The FRM220A-iMux16 supports an E1 attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The FRM220A-iMux16 fully meets E1 specifications including ITU-T G.703 and G.823. The FRM220A-iMux16 features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the FRM220A-iMux16 and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration.

Gigabit Ethernet OAM/IP In-band Converter/Switch

The FRM220A-1000EAS/X is an IEEE802.3ah OAM compliant dual copper to dual fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector. With SNMP and Web-based management in the FRM220, the network administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. By offering 802.3ah OAM Compliant in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc.

Lanode.com

Inverse Multiplexer/Ethernet Switch Platform

FRM220A Inverse Multiplexer/Ethernet Switch Platform

Gigabit Ethernet Aggregate Switch

Gigabit Ethernet Aggregate Switch

iMux4 Inverse Multiplexer

iMux4 Inverse Multiplexer

iMux8 Inverse Multiplexer

iMux8 Inverse Multiplexer

iMux16 Inverse Multiplexer

iMux16 Inverse Multiplexer

Gigabit Ethernet OAM/IP In-band Converter/Switch

Gigabit Ethernet OAM/IP In-band Converter/Switch

Register my details

Explore the range

Recent Updates

How can we help?

Search

Live Demo of FRM220 Chassis

Related Products