Dual Channel GBE In-band Converter/Switch + OAM/IP
The FRM220-1000EAS is an IEEE802.3ah OAM compliant dual copper to dual fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector. With built-in SNMP and Web-based management, the network administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. By offering 802.3ah OAM Compliant in-band management, this converter can be completely controlled and monitored from a centrally located managed rack controlling all converter settings including band-width control, duplex, and speed configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc.
Features:
- Supports local / remote 802.3ah OAM / IP In-band management
- Stand-alone IP Based, Web GUI, Telnet, SNMP management
- 2-port 10/100/1000Base-T to 2-port 1000Base-SX/LX SFP
- Auto-Negotiation or forced mode
- Auto MDI/MDIX
- Forward 1632 bytes (max.) packets
- Supports Q in Q double tagged frame transparent
- Supports IEEE 802.1q Tag and Port based VLAN
- Supports Flow control (Pause)
- Supports OAM remote loopback to assist in diagnosing network problems
- Supports bandwidth control (70K ~ 250Mbps)
- Supports remote CPE power fail detect (dying gasp)
- Supports Far End Fault
- Supports Link Fault Pass through (LFP)
- Supports Loop Back Test
- Supports RMON counter
- D/D function for supported SFP fibre transceiver
- Auto Laser Shutdown (ALS)
- Fibre Hardware Reset (FHR)
- Online local / remote f/w upgrade
- Fibre Redundant
- VLAN
- Spanning Tree
- Port Trunking
Specifications:
Optical Interface:
- Connector: SFP LC
- Data rate: 1000Mbps
- Duplex mode: Full duplex
- Fibre: MM 50/125μm, 62.5/125μm; SM 9/125μm
- Distance: MM 550m, 2km, SM 15/30/50/80/120km; WDM 20/40/60km
- Wavelength: MM 1310nm, SM 1310,1550nm; WDM 1310Tx/1550Rx (type A); 1550Tx/1310Rx (type B)
Electrical Interface:
- Connector: RJ45
- Data rate: 10Mbps, 100Mbps, 1000Mbps
- Duplex mode: Half / Full duplex
- Cable: 10Base-T Cat.3, 4, 5, UTP; 100Base-TX Cat.5, 5e or higher; 1000Base-T Cat.5, 5e or higher
Standard: IEEE 802.3, IEEE 802.3u, iEEE 802.1q
Indications: LED Power, FX-Link, Test, TX-Link, TX-SPD
Power Input: Card : 12VDC, Standalone : AC, DC options
Power Consumption: < 4W
Dimension: 155 x 88 x 23mm (D x W x H)
Weight: 120g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 65,000 hrs (25°C)
