Gigabit Ethernet Managed Switch
The FRM220A-1002ES is an industrial grade dual copper to dual fibre Gigabit Ethernet managed switch designed to make conversion between 10/100/1000Base-T and 100/1000Base-SX/LX with SFP connector. With SNMP and Web-based management in the FRM220 chassis the network administrator can monitor, configure and control the activity of each FRM220A-1002ES switch card locally via the SNMP manager, the functions including bandwidth control, QoS, VLAN, duplex and speed configuration. This managed switch is completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, IPX, IP, etc.
Application:
Features:
- 2 Port 10/100/1000BASE-T to 2 Port 100/ 1000BASE-FX Converter
- Auto-Cross over for MDI/MDIX in TP port
- Auto-Negotiation or Manual mode in TP port
- Support flow control Enable or Disable
- Support Jumbo Frame 10K Packet
- Support 16 Tag VLAN Group
- Support Double VLAN tag (Q-in-Q)
- Support Bandwidth control
- Support Loop Back Test
- Support Link Fault Pass Through ( LFP ) Function
- Support Auto Laser Shutdown (ALS) Function
- Console management on stand-alone.
- Support D/D function for SFP fibre transceiver
- Provide Product information for management
- Support the local management (Monitor or Configure status) by the SNMP manager.
Specifications:
Optical Interface
- Connector: SFP-LC
- Data rate: 100Mbps, 1000Mbps
- Duplex mode: Full duplex
- Fibre: MM 50/125μm, 62.5/125μm. SM 9/125μm
- Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
- Wavelength: MM 1310nm, SM 1310,1550nm; WDM 1310Tx/1550Rx (type A); 1550Tx/1310Rx (type B)
Electrical Interface
- Connector: RJ45
- Data rate: 10Mbps, 100Mbps
- Duplex mode: Half / Full duplex
- Cable: 10Base-T Cat.3, 4, 5, UTP, 100Base-TX Cat.5, 5e or higher
Standard: IEEE 802.3, IEEE 802.3u, 802.3z, 802.3ab
LED Indications: PWR, LNK1, LNK2, TEST, LAN Link, LAN SPEED
Power Input: DC 12V in
Power Consumption: < 5V
Dimension: 155 x 88 x 23mm (DxWxH)
Weight: 120g
Housing: Metal
Temperature: Operating: 0 ~ +60°C; Storage: 0 ~ +60°C
Humidity: 0 ~ 95% non-condensing
Certification: FCC Part 15 Class A,CE Mark
