FRM220-40G-1Q4S Transponder
FRM220-40G-1Q4S 40G QSFP to 4x 10G SFP+ Transponder
The FRM220-40G-1Q4S is a 40G QSFP to 4x 10G SFP+ transponder that provides media conversion and distance extension for 40G over 10G links. The FRM220-40G-1Q4S meets the growing need for more bandwidth for data centres and enterprises. The emergence of high-end servers and Ethernet switches with 40G Ethernet interfaces increases the need for media conversion (multi-mode to single-mode) and link range extension. The FRM220-40G-1Q4S is hot-swappable with one QSFP slot for QSFP 40G transceiver and four SFP+ slots for SFP+ 10G transceiver. The installation and setup is simple plug and play. The FRM220-40G-1Q4S can be inserted into any powered FRM220-CH20 chassis with QSFP and SFP+ transceivers required for the application.
Read more...
FRM220-16G-3R Transponder
FRM220-16G-3R Transponder
The FRM220-16G-3R has 4 SFP+ slots that can be configured as a dual channel 16G 3R multi-rate transponder or in a 1-to-2 port protection mode. The device provides a flexible transmission of various protocols, like 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, FC 1/2/4/8/10/16G, ODU, OBSAI, CPRI..etc. Using SFP+ ports with dedicated CWDM or DWDM wavelengths, the 16G transponder supports a multi-rate functionality with data rates from 1Gbps up to 14Gbps. With its functionality the FRM220-16G-3R transponder is suitable as a repeater for transmission over extended distances. In addition, the use of state of the art components greatly reduces the power requirements and heat dissipation factors of our previous transponders.
Read more...
FRM220-10G-FEC Transponder
FRM220-10G-FEC 10G Ethernet FEC Multi-rate Transponder
The FRM220-10G-FEC is a conversion module suitable for high-speed 10G signals with Forward-Error-Correction (FEC). The module supports four flexible SFP+ ports suitable for wavelength conversion and the transferring application for 10GbE and STM-64. The main benefit of FRM220-10G-FEC application is to provide cost-optimized CWDM and DWDM networks. As an intelligent transponder module, the FRM220-10G-FEC converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for use as a repeater. The data rates between 9.95Gbps and 11.32Gbps can be provided. Two types of housings are available for installation in a 19” FRM220 chassis. 20 slots are provided by using the FRM220-CH20 chassis 2U while the FRM220-CH08 1U supports up to 8 modules. Both housings can be monitored and configured through SNMP, Web GUI or Telnet using a NMC management module.
Read more...
FRM220-10G-SS 3R Transponder
FRM220-10G-SS 3R Transponder
The FRM220-10G-SS is a 10G fibre to fibre 3R repeater and transponder. Based on a number of 10 Gigabit Fibre standards, these transponders support SFP+ to SFP+ (SS) fibre connections. The transponders are protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) regeneration between these different optical module types. One of the major applications for this converter is in connecting proprietary transceiver equipment to CWDM or DWDM when these 'coloured' optical modules are not available for the proprietary equipment. With transparent bi-directional forwarding capability between the 2 fibre media, the FRM220-10G brings you the best and simplest solution for your 10G conversion between fibre and fibre.
Read more...
FRM220-10G-SXX 3R Transponder with OLP
FRM220-10G-SXX 10G 3R Transponder with Optical Line Protection
The FRM220-10G-SXX is a 10G fibre to fibre 3R repeater and transponder. Based on 10 Gigabit Fibre standards, the transponder support SFP+ to XFP (SX) or XFP to XFP (XX) fibre connections. 1+1 Automatic optical line Protection Switching is supported for the aggregate XFP fibre ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) regeneration between these different optical module types. One of the major applications for this converter is in connecting proprietary transceiver equipment to CWDM or DWDM when these 'coloured' optical modules are not available for the proprietary equipment. With transparent bi-directional forwarding capability between the 2 fibre media, the FRM220-10G-SXX brings you the best and simplest solution for your 10G conversion between fibre and fibre.
Read more...
FRM220-4G-3S 2R Transponder
FRM220-4G-3S 2R Transponder
The FRM220-4G-3S is a 2R 4G optical regeneration device, which consists of Re-amplification and Re-shaping. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching are supported for the aggregate fibre ports. When the FRM220-4G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fibre link status and alarms. The card can be configured to enable or disable the port, reset the port and set the desired data rate.
Read more...
FRM220-2.7G-3S 3R Transponder
FRM220-2.7G-3S 3R Transponder
The FRM220-2.7G-3S is a 3R 2.7G optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching are supported for the aggregate fibre ports. When the FRM220-2.7G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fibre link status and alarms. The card can be configured to enable or disable the port, reset the port and set the desired data rate.
Read more...
FRM220-155MS 2R Transponder
FRM220-155MS 2R Transponder
 
The FRM220-155MS is a fibre to fibre optical media converter and repeater that allows data rates up to 155Mbps. FRM220-155MS supports 2R regeneration, which consists of re-amplification and reshaping. This converter is compatible with fibre interfaces such as 100Mbps Fast Ethernet, 155Mbps STM1 and OC3. The FRM220-155MS works well with FRM220-CH20 chassis as slide-in card or with FRM220-CH01, one slot chassis as a stand-alone fibre converter. When the FRM220-155MS card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fibre link status and alarms. The card can be configured to enable or disable the port, reset the port or enable/disable Auto Laser Shutdown.
Read more...
4 Channel Optical Crossbar
4 Channel Optical Crossbar
The 4 Channel Optical Crossbar module offers full 3R signal regeneration bundled with a free configurable crossbar matrix for data rates from 50 Mbps up to 2.7 Gbps. This module includes a flexible switchable crossbar logic. It allows free allocation of four channels – besides the protection of the optical link. Plenty of different applications are possible: Twin converter for point-to-point links with high port density, hardware-redundant configuration, channel protection and signal multiplication (Broadcast). The Optical Crossbar converter is designed as a plug-in module card, which is installed into a modular converter system. A potential free alarm contact, which can be used for the connection to external alarm systems, is a further feature.
Read more...
|
