4x10/100/1000Base-T + 2x100/1000Base-X SFP with 4xPoE+
The IGS-402SM-4PH24 series models are managed industrial grade Gigabit PoE (Power over Ethernet) switches with 4 ports 10/100/1000Base-T PoE ports and 2 ports Fast/Gigabit Ethernet SFP ports that provide stable and reliable Ethernet transmission. With dual power input design, the series models can provide redundancy mechanism for critical applications that need always-on connections. These switches can also operate either at standard operating temperature range (-10 to 60°C) or at wide operating temperature range (-40 to 75°C) so as to fulfill the special needs of industrial automation applications. Housed in rugged DIN rail or wall mountable IP-30 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Apart from specially-designed outlook and hardware features, the Ethernet switches also support a wide variety of management functions, including STP/RSTP/MSTP/ ITU-T G.8032 Ring and multiple u-Ring for redundant cabling, advanced PoE management functions such as PoE device auto-checking and auto reset, PoE power on/off weekly scheduling, layer 2 Ethernet IGMP, VLAN, QoS, Security, IPv6, bandwidth control, port mirroring, cable diagnostics and Green Ethernet.
Features:
- 4x 10/100/1000Base-T(X) RJ-45 with 2x 100/1000Base-X SFP Fibre with 4xPoE+, total 120W power
- 24/48VDC Redundant dual input Power, and Built-in power booster design upto 55 VDC for PoE/PoE+ output
- Constant and regulated PoE output voltage at 55VDC
- Provides 8-port IEEE802.3af / 802.3at PoE Output (30W per Port)
- Maximum PoE Output power budget 180W
- Advanced PoE Management, PoE PD auto detection and auto reset, PoE configuration for power planning, weekly scheduling
- UL508, CE, FCC, Rail Traffic EN50121-4 Certified
- Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 Certified
- Cable diagnostic, Measuring cable OK or broken point distance
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption
- STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR) for cabling redundant
- QoS, Traffic classification QoS, CoS, Band width control for Ingress and Egress, Strom Control, DiffServ
- IEEE802.1q VLAN, port base VLAN, Mac base VLAN, IP subnet base VLAN, Protocol base VLAN, VLAN translation, MVR
- Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
- IGMP/MLD snooping V1/V2/V3, IGMP Filtering / Throttling, IGMP query, IGMP proxy reporting, MLD snooping
- Security : Port Base and Mac base IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
- Cisco® like CLI, Web base management, SNMP v1/v2c/v3, Telnet server for management
- Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgradeing failure
- DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- RMON, MIB II, Port mirroring, Event syslog, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL
Specifications:
IEEE Standard:
- IEEE 802.3 10Base-T 10Mbit/s Ethernet
- IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
- IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
- IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
- IEEE 802.1d STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
- ITU-T G.8032/ Y.1344 EPR (Ethernet Protection Ring)
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1X for Authentication
- IEEE 802.3ad for Port Trunk with LACP
- IEEE802.3x Flow Control and Back Pressure
- IEEE802.3af PoE (Power over Ethernet)
- IEEE 802.3at PoE+ (Power over Ethernet ehancements)
- IEEE 802.1ad Stacked VLANs, Q-in-Q
- IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
- IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
- IEEE 802.3az EEE (Energy Efficient Ethernet
VLAN ID: 4096
Switch Architecture: Back-plane (Switching Fabric): 12Gbps
Data Processing: Store and Forward
Flow Control: IEEE 802.3x for full duplex mode; Back pressure for half duplex mode
Jumbo Frame: 9.6KB
MAC address Table Size: 8K
PoE standard: IEEE802.3af, IEEE802.3at
PoE RJ-45 pin assignment:
- 4x IEEE 802.3af /IEEE 802.3at PoE+ (IGS-402SM-4PH24)
- End-Span, Alternative A mode.
- Positive (V+) : RJ-45 pin 1, 2.
- Negative (V-) : RJ-45 pin 3, 6.
- Data (1,2,3,6,4,5,7,8)
Network Connector:
- 4x 10/100/1000Base-T RJ-45 + 2x 100/1000Base-X SFP connector (IGS-402SM-4PH24)
- RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function, SFP port support 100/1000 dual speed with DDMI
Console: RS-232 (RJ-45)
Network Cable: UTP/STP above Cat. 5e cable; EIA/TIA-568 100-ohm (100m)
Protocol: CSMA/CD
Reverse polarity protection: Present
Overload current protection: Present
CPU Watch Dog: Present
Power Supply: Redundant Dual DC 24/48V (20~57VDC) Input power (Removable Terminal Block)
LED:
- Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow)
- Per RJ-45 port: 10/100 Link/Active (Green); 1000 Link/Active (Amber)
- SFP Fibre Per port: Link/Active (Green)
- PoE Port LED 1 LED /per Port:
- PoE Output Power On : ON (Green)
- PoE Fault (Over Load, Short Circuit, Port failed at Startup) :
- Flash 1times /sec (Green) PoE Output Power Off : Off (Green)
PoE Power Output: Maximum PoE Output power budget 180W (30W/per port)
Power Consumption:
- 24VDC: Total Consumption 135.2W; Device Consumption 7.5W; PoE 120W
- 48VDC: Total Consumption 132.5W; Device Consumption 9W; PoE 120W
Warning Message: System Syslog, SMTP/ e-Mail event message, alarm relay
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 Redundant power, Alarm relay contact ,6 Pin
Operating Temperature: 0 ~ 60°C (IGS-402SM-4PH24), -40 ~ 75°C (IGS-402SM-4PH24)
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 ~ 85°C
Housing: Rugged Metal, IP30 Protection
Case Dimension: 72 x 106 x 142mm (W x D x H)
Installation mounting: DIN Rail mounting and Wall Mounting
EMC/EMS: CE, FCC
EMI:
- FCC Part 15 Subpart B Class A, CE EN 55022 Class A
- EN61000-6-4 – Emission for industrial environment
EMS:
- EN61000-6-2 – Immunity for Industrial environment
- EN61000-4-2 (ESD) Level 3,Criteria B
- EN61000-4-3 (RS) Level 3,Criteria A
- EN61000-4-4 (EFT) Level 3,Criteria A
- EN61000-4-5 (Surge) Level 3,Criteria B
- EN61000-4-6 (CS) Level 3,Criteria A
- EN61000-4-8 (Magnetic Field) Level 3,Criteria A
Safety: UL508 (Pending)
Rail Traffic: EN 50121-4
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 276,161 hours
Warranty: 5 years
Software Specifications:
Management: Web, Telnet, CLI Console/Telnet, Console, SNMP v1/v2c/v3, Software Upgrade by Web, HTTP, LLDP, LLDP-MED, DHCP Client, DHCP snooping, DHCP option 82 relay, SNTP & client, NTPv4 Client
VLAN: 802.1Q, Port-based VLAN, MAC based VLAN, Protocol-based VLAN
Bandwidth setting: LACP, IGMPv2 snooping, IGMPv3 snooping
Secuity: MAC Address Limit, TACACS+, Port-Based 802.1X, Single 802.1X, Multiple 802.1X, MAC-Based Authentication, VLAN Assignment, QoS Assignment, RADIUS Accounting, SSH V2, Web & CLI Authentication, ACLs for filtering/policing/port copy
QoS: Cos,ToS Differser, Traffic Classes (8 active priorities)
Warning message: System Syslog , e-Mail ,alarm relay
Redundancy: STP, RSTP, MSTP, G.8032 Ethernet protection Ring
PoE: PoE Enable/Disable, Power limit by classification, Power limit by management, Power feeding priority, PD Auto Detection and Auto Reset, PoE Scheduling
MIB: RFC 2674 VLAN MIB, IEEE 802.1Q Bridge MIB, Bridge MIB, RFC 2819 RMON (Group 1, 2. 3 & 9), RFC 3635 Ethernet-like MIB, RFC 1213 MIB II, IEEE 802.1 MSTP MIB
