8-Port 10/100/1000Base-T(X) with 3-Port 100/1000 SFP slot
The IGS-803SM-8PH24 Series are Gigabit Ethernet managed PoE+ Ethernet switches that come standard with 8 ports 10/100/1000Base-T(X), its port 1 to port 8 compliant with IEEE802.3af/at (PoE), and 3 SFP Gigabit/Fast Ethernet ports. The IGS-803SM-8PH24 series Ethernet switches provide up to 30W watts of power per PoE port for industrial heavy-duty PoE devices, such as weather-proof IP cameras, high-performance wireless access points, and rugged IP phones. The IGS-803SM-8PH24 Ethernet switches are highly versatile, support 24/48VDC power input booster, and it is able to fit all the common 24/48 VDC power system found in industrial fields or cabinets. The Ethernet switches support a variety of management functions, including STP/RSTP/MSTP and ITU-T G.8032 Ring <50ms recovery time, Advanced PoE management, PoE device auto-checking and auto reset, PoE power Weekly scheduling, IGMP, VLAN, QoS, Security, IPV6, bandwidth Control, port mirroring, cable diagnostic, and Green Ethernet. The IGS-803SM-8PH24 series is designed especially for security automation applications with high EMS immunity to ensure uninterrupted reliability of PoE systems such as IP surveillance, passenger information systems, auto gate entry system which can benefit from a scalable backbone construction and Power-over-Ethernet support.
Features:
- 8x 10/100/1000Base-T(X) RJ-45 with 3x 100/1000Base-X SFP Fibre
- 24/48VDC Redundant dual input Power, and Built-in power booster design upto 55 VDC for PoE/PoE+ output
- Constant and regulated PoE output voltage at 55VDC
- Provides 8-port IEEE802.3af / 802.3at PoE Output (30W per Port)
- Maximum PoE Output power budget 180W
- Advanced PoE Management, PoE PD auto detection and auto reset, PoE configuration for power planning, weekly scheduling
- UL508, CE, FCC, Rail Traffic EN50121-4 Certified
- Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 Certified
- Cable diagnostic, Measuring cable OK or broken point distance
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption
- STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR) for cabling redundant
- QoS, Traffic classification QoS, CoS, Band width control for Ingress and Egress, Strom Control, DiffServ
- IEEE802.1q VLAN, port base VLAN, Mac base VLAN, IP subnet base VLAN, Protocol base VLAN, VLAN translation, MVR
- Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
- IGMP/MLD snooping V1/V2/V3, IGMP Filtering / Throttling, IGMP query, IGMP proxy reporting, MLD snooping
- Security : Port Base and Mac base IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
- Cisco® like CLI, Web base management, SNMP v1/v2c/v3, Telnet server for management
- Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgradeing failure
- DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- RMON, MIB II, Port mirroring, Event syslog, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL
Specifications:
IEEE Standard:
- IEEE 802.3 10Base-T 10Mbit/s Ethernet
- IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
- IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
- IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
- IEEE 802.1d STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
- ITU-T G.8032/ Y.1344 EPR (Ethernet Protection Ring)
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1X for Authentication
- IEEE 802.3ad for Port Trunk with LACP
- IEEE802.3x Flow Control and Back Pressure
- IEEE802.3af PoE (Power over Ethernet)
- IEEE 802.3at PoE+ (Power over Ethernet ehancements)
- IEEE 802.1ad Stacked VLANs, Q-in-Q
- IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
- IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
- IEEE 802.3az EEE (Energy Efficient Ethernet
VLAN ID: 4096
Switch Architecture: Back-plane (Switching Fabric): 22Gbps
Data Processing: Store and Forward
Flow Control: IEEE 802.3x for full duplex mode; Back pressure for half duplex mode
Jumbo Frame: 9.6KB
MAC address Table Size: 8K
PoE standard: IEEE802.3af, IEEE802.3at
PoE RJ-45 pin assignment:
- 8 RJ-45 port support IEEE 802.3af End-Span, Alternative A mode.
- Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6.
- Data (1,2,3,6)
Network Connector:
- 8 x RJ-45 10/100/1000BaseT(X) auto negotiation speed
- Auto MDI/MDI-X function, Full/Half duplex
- 3 X 100/1000 BaseX dual speed mode SFP slot,with DDMI
Console: RS-232 (RJ-45)
Network Cable: UTP/STP above Cat. 5e cable; EIA/TIA-568 100-ohm (100m)
Protocol: CSMA/CD
Reverse polarity protection: Present
Overload current protection: Present
CPU Watch Dog: Present
Power Supply: Redundant Dual DC 24/48V (20~57VDC) Input power (Removable Terminal Block)
LED:
- Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow)
- Per RJ-45 port: 10/100 Link/Active (Green); 1000 Link/Active (Amber)
- SFP Fibre Per port: Link/Active (Green)
- PoE Port LED 1 LED /per Port:
- PoE Output Power On : ON (Green)
- PoE Fault (Over Load, Short Circuit, Port failed at Startup) :
- Flash 1times /sec (Green) PoE Output Power Off : Off (Green)
PoE Power Output: Maximum PoE Output power budget 180W (30W/per port)
Power Consumption:
- 24VDC: Total Consumption 200.2W; Device Consumption 9.2W; PoE 180W
- 48VDC: Total Consumption 195.1W; Device Consumption 9.8W; PoE 180W
Warning Message: System Syslog, SMTP/ e-Mail event message, alarm relay
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 Redundant power, Alarm relay contact ,6 Pin
Operating Temperature: 0 ~ 60°C (IGS-803SM-8PH24), -40 ~ 75°C (IGS-803SM-8PH24)
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40 ~ 85°C
Housing: Rugged Metal, IP30 Protection
Case Dimension: 72 x 106 x 142mm (W x D x H)
Installation mounting: DIN Rail mounting and Wall Mounting
EMC/EMS: CE, FCC
EMI:
- FCC Part 15 Subpart B Class A, CE EN 55022 Class A
- EN61000-6-4 – Emission for industrial environment
EMS:
- EN61000-6-2 – Immunity for Industrial environment
- EN61000-4-2 (ESD) Level 3,Criteria B
- EN61000-4-3 (RS) Level 3,Criteria A
- EN61000-4-4 (EFT) Level 3,Criteria A
- EN61000-4-5 (Surge) Level 3,Criteria B
- EN61000-4-6 (CS) Level 3,Criteria A
- EN61000-4-8 (Magnetic Field) Level 3,Criteria A
Safety: UL508 (Pending)
Rail Traffic: EN 50121-4
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 311,376 hours
Warranty: 5 years
Software Specifications:
Management: Web, Telnet, CLI Console/Telnet, Console, SNMP v1/v2c/v3, Software Upgrade by Web, HTTP, LLDP, LLDP-MED, DHCP Client, DHCP snooping, DHCP option 82 relay, SNTP & client, NTPv4 Client
VLAN: 802.1Q, Port-based VLAN, MAC based VLAN, Protocol-based VLAN
Bandwidth setting: LACP, IGMPv2 snooping, IGMPv3 snooping
Secuity: MAC Address Limit, TACACS+, Port-Based 802.1X, Single 802.1X, Multiple 802.1X, MAC-Based Authentication, VLAN Assignment, QoS Assignment, RADIUS Accounting, SSH V2, Web & CLI Authentication, ACLs for filtering/policing/port copy
QoS: Cos,ToS Differser, Traffic Classes (8 active priorities)
Warning message: System Syslog , e-Mail ,alarm relay
Redundancy: STP, RSTP, MSTP, G.8032 Ethernet protection Ring
PoE: PoE Enable/Disable, Power limit by classification, Power limit by management, Power feeding priority, PD Auto Detection and Auto Reset, PoE Scheduling
MIB: RFC 2674 VLAN MIB, IEEE 802.1Q Bridge MIB, Bridge MIB, RFC 2819 RMON (Group 1, 2. 3 & 9), RFC 3635 Ethernet-like MIB, RFC 1213 MIB II, IEEE 802.1 MSTP MIB
