FMUX101 Modularized 16E1/T1 + 4x FE Fibre Managed Multiplexer (E1/T1, Data, Voice, Ethernet)

FMUX101 FE Fibre Managed Multiplexer

The FMUX101 is a 1U, 19" rack mountable, PDH fibre optic multiplexer that transmits up to 16 channels plus a 10/100Base-TX Fast Ethernet channel over a single fibre optic link. The FMUX101 chassis supports redundant power and hot swappable design. The AC supplies operate from 90~260VAC while DC supplies operate from 36~72VDC or 20~60VDC. From the rear of the chassis, one to four hot swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530) or FXO/FXS voice cards are supported. The standard FMUX101 configuration may be viewed or set via the front panel LCD/menu keys, serial VT-100 terminal connection, Telnet, web HTTP or SNMP.

 

FMUX101 FE Fibre Managed Multiplexer schematic

 

Features:

  • 1U, 19 (23)” 4-slot chassis
  • 16 E1 (2.048Mb/s) Multiplexer, 10/100Mbps Ethernet and RS-232 data (async)
  • RS-232 port for system console
  • One alarm output port, one Order Wire port
  • SNMP management
  • LCD plus menu keys for local configuration
  • Port based VLAN, tag based VLAN & bandwidth control
  • Telnet and web based remote configuration
  • 2 plug-in SFP slot in I/O slots for optical SFP module

Specifications for available Modules:

FMUX1001 FXO FXS module

FXO/FXS Module

Standards: G.711 A-law (separate modules for FXO, FXS)
Voice channel transparent: T.38 and Group III Fax relay at 2.4 ~14.4kbps Fax application
Distance: 2km
Bandwidth: 64K voice channel
Connector: RJ11*4 (4 voice channel /per unit)
Internet application: Supports modem pass-through

E1/T1 RJ45 Interface Module

FMUX1001 E1 T1 RJ45 ModuleStandards: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403
Ports:
4 ports
Framing: Unframed ( clear channel )
Data rate:
T1: 1.544 Mbps ±50 ppm; E1: 2.048 Mbps ±50 ppm
Line code:
T1: B8ZS / AMI; E1: HDB3 / AMI
Receive Level:
Short haul - 15dB
Line impedance:
T1: 100 ohms ±5%; E1: 120 ohms ±5%
Connector: RJ-45

Datacom Interface Module

FMUX1001 Datacom ModuleStandards: ITU-T, E1A
Card Type: V.35/ RS-530 (Include X.21 and RS-449)/ RS-232 I/F
Bit rate: n x 64K, n = 1 to 32; V.35 & RS-530 up to 2Mbps; RS-232 up to 115.2Kbps (ASYNC)
Line code: NRZ
Clock Mode:
Transparent, Recovery; External (From data port ETC); Internal (From oscillator)
Control Signal:
CTS always On or follows RTS; DSR constantly ON, except during test loops (RS-530 DSR always connect to DTR); DCD constantly ON,except during fibre signal loss
Test Loops:
Local loop back, Remote loop back, V.54
Connector:
Type Uses HD-68 pin D type Female with adapter cables

E1 Interface Module

FMUX1001 E1 BNC ModuleStandards: ITU-T G.703, G.704, G.706, G.732
Ports: 4 ports
Framing: Unframed ( clear channel )
Data rate: 2.048 Mbps ± 50 ppm
Line code: HDB3/AMI
Receive Level: Short haul - 15dB
Line impedance: 75 ohms ± 5% / 120 ohms ± 5%
Connector: RJ-45 for 120 ohms BNC for 75 ohms Wirewrap for 120 ohm

Specifications:

Optical Interface

  • Connector: SFP - LC
  • Data rate: 155Mbps
  • Bit Error Rate: Less than 10-11
  • Fibre: MM 62.2/125μm, 50/125μm; SM 9/125μm
  • Distance: MM 2km. SM 15/30/50/80/120km; WDM 20/40/60/80km
  • Wavelength: 1310, 1550nm

Electrical Interface

  • Console, SNMP: RJ45
  • Ethernet: 4 x RJ45
  • Alarm: RS232 (DB9F)

Standards: E1:ITU-T, T1:ITU-T, AT&T, ANSI, Ethernet: IEEE802.3x
Indications: PWR, Alarm, LBK, RD, LCK, RNG, ACO, Port, Channels
Power Input: AC : 100 ~240V; DC24 : 20 ~ 60V, DC48 : 36 ~ 72V
Power Consumption: < 40W
Dimensions: 250 x 438 x 43mm (D x W x H)
Weight: 3.58 kg
Temperature: 0 ~ 50°C (Operating), 0 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, RoHS compliant
MTBF: 57,350 hours


Live Demo of FRM220 Chassis

More Information

Name
0 (Min. 0 Characters)
Company Name
0 (Min. 0 Characters)
Your Email
Telephone
Message
0 (Min. 16 Characters)