10/100Mbps Network Interface Card
10/100Mbps Network Interface Card
The ALLOY-1439XD is a realtek based 10/100Mbps Network Interface card for use in standard PCI servers and workstations. All standard PC Operating Systems supported. It features Nway Auto-Negotiation for speed selection of 10Mbps or 100Mbps, in half-or full-duplex mode. The EtherZIP 100XD fully complies with all IEEE 802.3u, 10/100Base-TX standards. Designed with Realtek single-chip Fast Ethernet LAN controller, the EtherZIP 100XD uses high speed Bus-Mastering DMA to optimize throughput while maintaining low CPU utilization. Additional support for ‘Wake on LAN’ and remote BootROM applications is also provided, while external LED's provide for easy diagnostic's of the cards operation. Extensive Networking Operating System (NOS) drivers are available including, Win XP/2000/NT/98/ME, NetWare, IntraNetware, Linux etc. The ALLOY-1439XD is also available with a Low Profile Bracket.
Read more...
100Mbps PCI-E Fibre Optic Network Card
100Mb PCI-E Multimode Fibre Optic (SC) Network Adapter. 2Km
The ALLOY102Exx is a 100Mbps PCI-E fibre optic network card designed for modern high reliability managed fibre networks. The adapter is compliant to PCI-E 1.0, 4 fibre termination types are supported, ST, STR, SC and LC. Utilising the new PCI-E standard, the ALLOY102E Series fibre optic network adapters deliver high performance 100Mb Fibre network connectivity. The PCI-Express design gives you the maximum possible bandwidth and bus efficiency as well as lower power consumption. With Software support for most popular Operating Systems including, Windows Server 2003, Vista, XP, 2000, NT, Netware 4.x, Linux, and NDIS2.
Read more...
Alloy-1440 Fibre Family Adapters
ALLOY-1440 Fibre Family Adapters
The ALLOY-1440 is a 100Mbps PCI fibre optic network card designed for modern high reliability managed fibre networks. The adapter is compliant to PCI 2.2 and will support PCI buses with either 5V, 3.3V or dual voltage standard PCI, 64Bit PCI or PCI-X slots. 5 fibre termination types are supported, ST, STR, SC, MT-RJ and VF-45. The Alloy-1440 uses a low profile PCB and can be supplied with either a full height or a low profile (half height) brackets to ensure support for the vast majority of workstations and servers. A wide range of fibre termination options are supported with SC, ST and Ruggedised ST in Multimode, and several variations in single mode. The Alloy-1440 is based on the Via 6105M Rhine chipset which provides Advanced Management and Power Conservation Features. The Via Rhine Chipset enables configuration of advanced features such as Priority Queuing to increase multimedia transfer speeds, VLAN tagging for security, TCP/UDP checksum offloading from the host CPU and adaptive interrupt handling to handle heavy network loads more efficiently. Advanced power management features include low power consumption from the 0.22 micron designed Via 6105M controller. The adapter also supports a remote BootROM socket which can be use with an optional PXE rom for remote booting from Windows based RIS servers. Wake on LAN (WoL) support is provided via the PCI bus as per PCI 2.2 specification, or via a provide cable for motherboards of PCI 2.1 or older specification.
Read more...
100Base-FX Fibre ExpressCard Network Adapter
100Base-FX Fibre ExpressCard Network Adapter
The EC100FX Series 100Base-FX Fibre Network Adapters are designed to plug into a notebook or desktop computer equipped with an ExpressCard slot. Model EC100FXSC provides SC type connectors. ExpressCard is a open hardware standard developed by the Personal Computer Memory Card International Association (PCMCIA) and issued by the ITU-T. This standard replaces earlier PC Card (also known as PCMCIA card) technology. The host device supports both PCI Express and USB 2.0 connectivity through the ExpressCard slot . Alloy EX100FX Series Network Adapters utilise the PCI Express connectivity. The major benefit of ExpressCard technology over PCMCIA CardBus is a dramatic increase in bandwidth, ExpressCard has a maximum throughput of 2.5 Gbit/s through PCI Express versus CardBus's shared 1.06 Gbit/s bandwidth. ExpressCard devices are hot-pluggable. All models in the EC100FX Series provide fibre optic link capability for notebook PC to connect to fibre networks at 100Mbps data rate over fibre optic multimode cable, with a maximum cable distance of up to 2Km. Diagnostic LEDs are easily visible to support maintenance tasks. A comprehensive Network Operating System (NOS) driver suite supports NetWare, Windows 98/NT/2000/XP/Vista /2003 server/2008 server. Linux and PXE remote boot is available.
Read more...
100Base-FX Fibre Optic CardBus PnP Adapter
100Base-FX Fibre Optic CardBus PnP Adapter. ST port.
The FE-6590ST/SC Fast Ethernet Fibre-Optic PCMCIA Card is the perfect solution for connecting laptops/Notebooks to high speed fibre-optic LANs via a 32bit PCMCIA interface. Supporting 100Mbps, in both Full and Half Duplex environments, the single piece card features an ST or SC fibre-optic port and diagnostic LED's attached directly onto the PCMCIA card body.
Extensive Network Operating System (NOS) drivers such as NetWare, Windows 95/98/2K/XP/2K3 and Linux are available. With its unique, robust, single piece design, the FE-6590ST/SC is easy to use and install. It requires no external power supply, but derives all power for the Fibre interface of the HOST system. Ruggedised Metal Fibre connectors on models ending in "R" are Ideal for use in mobile systems that may get moved frequently, and should avoid accidental damage to the Fibre connectors. The FE-6590 series has been supplied to military and government departments worldwide.
Read more...
Scorpion USB 2.0 to 100Base-FX Ethernet Adapter
Scorpion USB 2.0 to 100Base-FX Ethernet Adapter
From Transition Networks, use the Scorpion-USB to create an EMI-secure data connection over fibre between a USB port on a PC or laptop and a 100Mbps Ethernet port on a switch. Used in applications where wireless transmission is not the preferred technology, this device allows the PC to connect to a fibre-based Ethernet network through its USB 2.0 interface, facilitating the sharing of files over the network, quickly, reliably and securely. Designed specifically for laptop, notebook, and tablet PCs, running today’s most popular operating systems, and deployed in fibre-rich networking environments. Just plug the adapter into the USB port, install the driver, and the connection is ready.
Read more...
|
